MAX485ECPA+ vs SN75176 موازنہ

تفصیلی ساتھ ساتھ موازنہ از MAX485ECPA+ بذریعہ Maxim Integrated اور SN75176 بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔

Maxim Integrated
MAX485ECPA+ MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim

MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim

MAX485ECPA+ ✓ فعال

خصوصیات کا موازنہ

پیرامیٹر MAX485ECPA+ SN75176
برانڈ Maxim Integrated Texas Instruments
زمرہ Interface ICs Interface ICs
لائف سائیکل کی حالت فعال فعال
Transceiver Configuration 1 driver / 1 receiver, half-duplex —
Interface Standard RS-485 / RS-422 differential —
سپلائی وولٹیج 5 V nominal (4.5 V to 5.5 V) —
Maximum Data Rate 1 Mbps (slew-rate-limited driver) —
Driver Output Type Differential, limited slew rate —
ESD Protection +/-15 kV on driver outputs and receiver inputs —
پیکیج PDIP-8 (8-pin plastic DIP, through-hole) 8-pin PDIP (P)
ماؤنٹنگ ٹائپ Through Hole Through-Hole
آپریٹنگ درجہ حرارت Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] 0 °C to +70 °C
Quiescent (Supply) Current [DATA_NEEDED: quiescent current] —
Receiver Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Receiver Input Sensitivity [DATA_NEEDED: receiver differential threshold] —
Driver Output Differential Voltage [DATA_NEEDED: differential output voltage] —
Driver Output Current [DATA_NEEDED: output current (standard / high-impedance load)] ±60 mA (max)
Enable Pins DE (driver enable) and /RE (receiver enable, active-low), separate pins —
Short-Circuit Protection Yes, driver outputs are short-circuit current limited —
تھرمل شٹ ڈاؤن Yes, protects against excessive power dissipation —
Quiescent Current Shutdown Pin Not present on this device —
RoHS اسٹیٹس Compliant (Maxim lead-free suffix '+') Compliant
Qualification Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] —
فنکشن — Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
Receiver Hysteresis — 50 mV (typical)
Supply Voltage (Vcc) — 4.75 V to 5.25 V
Common-Mode Input Range — -7 V to +12 V
Differential Input Threshold — ±200 mV
Quiescent Supply Current (enabled) — 30 mA (typical)
Shutdown Supply Current — 1 µA (typical)
Standards Compliance — ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27

Datasheets اور وسائل

تمام مصنوعات براؤز کریں BOM بنائیں قیمت کی درخواست کریں