MAX485ECPA+ vs SN75176 השוואה

השוואה מפורטת זה לצד זה של MAX485ECPA+ מאת Maxim Integrated ו SN75176 מאת Texas Instruments. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.

Maxim Integrated
MAX485ECPA+ MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim

MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim

MAX485ECPA+ ✓ פעיל

השוואת מפרטים

פרמטר MAX485ECPA+ SN75176
מותג Maxim Integrated Texas Instruments
קטגוריה Interface ICs Interface ICs
סטטוס מחזור חיים פעיל פעיל
Transceiver Configuration 1 driver / 1 receiver, half-duplex —
Interface Standard RS-485 / RS-422 differential —
מתח אספקה 5 V nominal (4.5 V to 5.5 V) —
Maximum Data Rate 1 Mbps (slew-rate-limited driver) —
Driver Output Type Differential, limited slew rate —
ESD Protection +/-15 kV on driver outputs and receiver inputs —
מארז PDIP-8 (8-pin plastic DIP, through-hole) 8-pin PDIP (P)
סוג הרכבה Through Hole Through-Hole
טמפרטורת פעולה Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] 0 °C to +70 °C
Quiescent (Supply) Current [DATA_NEEDED: quiescent current] —
Receiver Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Receiver Input Sensitivity [DATA_NEEDED: receiver differential threshold] —
Driver Output Differential Voltage [DATA_NEEDED: differential output voltage] —
Driver Output Current [DATA_NEEDED: output current (standard / high-impedance load)] ±60 mA (max)
Enable Pins DE (driver enable) and /RE (receiver enable, active-low), separate pins —
Short-Circuit Protection Yes, driver outputs are short-circuit current limited —
כיבוי תרמי Yes, protects against excessive power dissipation —
Quiescent Current Shutdown Pin Not present on this device —
סטטוס RoHS Compliant (Maxim lead-free suffix '+') Compliant
Qualification Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] —
פונקציה — Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
Receiver Hysteresis — 50 mV (typical)
Supply Voltage (Vcc) — 4.75 V to 5.25 V
Common-Mode Input Range — -7 V to +12 V
Differential Input Threshold — ±200 mV
Quiescent Supply Current (enabled) — 30 mA (typical)
Shutdown Supply Current — 1 µA (typical)
Standards Compliance — ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27

Datasheets ומשאבים

עיין בכל המוצרים צור BOM בקשת הצעת מחיר