MAX485EESA+ vs ADM489AR Vergleich
Detaillierter Direktvergleich von MAX485EESA+ von Analog Devices und ADM489AR von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ Aktiv
Spezifikationsvergleich
| Parameter | MAX485EESA+ | ADM489AR |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Product Type | RS-485/RS-422 Transceiver | Full-duplex differential line transceiver |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Datenrate | Up to 2.5 Mbps | 250 kbps |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | — |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| Betriebstemperaturbereich | -40 °C to +85 °C | [DATA_NEEDED: Operating temperature range] |
| Gehäuse / Bauform | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| Montageart | Surface Mount | Surface mount |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| MSL-Level | 1 (Unlimited) | — |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Bus Common-Mode Range | — | -12 V to +12 V |
| Minimum Input Impedance | — | 12 kΩ |
| EFT Protection | — | 2 kV |
| EFT Compliance | — | IEC 1000-4-4 |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Slew Rate | — | Slew-rate limited |
| Gehäuse | — | 14-pin SOIC, 3.90 mm width |
| Lebenszyklusstatus | — | Obsolete |
| RoHS-Status | — | [DATA_NEEDED: RoHS compliance] |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| Lead-Free Status | — | [DATA_NEEDED: Lead-free status] |