MAX485EESA+ vs ADM489AR 比較
詳細な並列比較: MAX485EESA+ メーカー: Analog Devices および ADM489AR メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | MAX485EESA+ | ADM489AR |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | Obsolete |
| Product Type | RS-485/RS-422 Transceiver | Full-duplex differential line transceiver |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| データレート | Up to 2.5 Mbps | 250 kbps |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | — |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| 動作温度範囲 | -40 °C to +85 °C | [DATA_NEEDED: Operating temperature range] |
| パッケージ / ケース | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| 実装タイプ | Surface Mount | Surface mount |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| MSLレベル | 1 (Unlimited) | — |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Bus Common-Mode Range | — | -12 V to +12 V |
| Minimum Input Impedance | — | 12 kΩ |
| EFT Protection | — | 2 kV |
| EFT Compliance | — | IEC 1000-4-4 |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Slew Rate | — | Slew-rate limited |
| パッケージ | — | 14-pin SOIC, 3.90 mm width |
| ライフサイクル状態 | — | Obsolete |
| RoHS ステータス | — | [DATA_NEEDED: RoHS compliance] |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| Lead-Free Status | — | [DATA_NEEDED: Lead-free status] |