MAX485EESA+ vs ADM489AR 比較
詳細並排比較 MAX485EESA+ 由 Analog Devices 與 ADM489AR 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX485EESA+ | ADM489AR |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | Obsolete |
| Product Type | RS-485/RS-422 Transceiver | Full-duplex differential line transceiver |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| 資料速率 | Up to 2.5 Mbps | 250 kbps |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | — |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| 工作溫度範圍 | -40 °C to +85 °C | [DATA_NEEDED: Operating temperature range] |
| 封裝 / 外殼 | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| 安裝類型 | Surface Mount | Surface mount |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| MSL 等級 | 1 (Unlimited) | — |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Bus Common-Mode Range | — | -12 V to +12 V |
| Minimum Input Impedance | — | 12 kΩ |
| EFT Protection | — | 2 kV |
| EFT Compliance | — | IEC 1000-4-4 |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Slew Rate | — | Slew-rate limited |
| 封裝 | — | 14-pin SOIC, 3.90 mm width |
| 生命週期狀態 | — | Obsolete |
| RoHS 狀態 | — | [DATA_NEEDED: RoHS compliance] |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| Lead-Free Status | — | [DATA_NEEDED: Lead-free status] |