MC1489NE4 vs MC1489N Vergleich
Detaillierter Direktvergleich von MC1489NE4 von Texas Instruments und MC1489N von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MC1489NE4 | MC1489N |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Funktion | Quadruple RS-232 line receiver | — |
| Number of Receivers | 4 | — |
| Protocol | EIA/TIA-232-F (RS-232) | — |
| Supply Voltage (nominal) | 5 V | — |
| Supply Voltage (max, distributor-listed) | 5.5 V | — |
| Input Signal Range | ±30 V | -30 V to +30 V |
| Input Resistance | 3.0 kOhm to 7.0 kOhm | 7 kΩ |
| Receive Delay (typ, distributor-listed) | 85 ns | — |
| Response Control | Separate CONT terminal per receiver | One response-control terminal per receiver |
| Ausgangstyp | TTL/CMOS-compatible logic level | — |
| Technology | Monolithic low-power Schottky bipolar | — |
| Gehäuse | 14-PDIP (N) | 14-pin PDIP |
| Montageart | Through-Hole | Through-hole |
| Betriebstemperatur | 0C to +70C (commercial grade, distributor-listed) | — |
| Power Dissipation (N package, TA=25C) | 1150 mW (datasheet dissipation table) | — |
| RoHS-Status | Compliant (distributor-listed) | [DATA_NEEDED: RoHS status] |
| Device Type | — | Quadruple RS-232 line receiver |
| Number of Receiver Channels | — | 4 channels |
| Receiver Architecture | — | Monolithic low-power Schottky |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Input Hysteresis | — | Built-in double thresholds |
| Response-Control Configuration | — | Resistor or resistor and bias-voltage source |
| Interface Standard | — | TIA/EIA-232-F |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Ruhestrom | — | [DATA_NEEDED: quiescent current] |
| Output Logic Levels | — | [DATA_NEEDED: output logic voltage levels] |
| Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| REACH Status | — | [DATA_NEEDED: REACH status] |