MC1489NE4 vs MC1489N Karşılaştırma
Ayrıntılı yan yana karşılaştırma MC1489NE4 tarafından Texas Instruments ve MC1489N tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | MC1489NE4 | MC1489N |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Fonksiyon | Quadruple RS-232 line receiver | — |
| Number of Receivers | 4 | — |
| Protocol | EIA/TIA-232-F (RS-232) | — |
| Supply Voltage (nominal) | 5 V | — |
| Supply Voltage (max, distributor-listed) | 5.5 V | — |
| Input Signal Range | ±30 V | -30 V to +30 V |
| Input Resistance | 3.0 kOhm to 7.0 kOhm | 7 kΩ |
| Receive Delay (typ, distributor-listed) | 85 ns | — |
| Response Control | Separate CONT terminal per receiver | One response-control terminal per receiver |
| Çıkış Türü | TTL/CMOS-compatible logic level | — |
| Technology | Monolithic low-power Schottky bipolar | — |
| Paket | 14-PDIP (N) | 14-pin PDIP |
| Montaj Türü | Through-Hole | Through-hole |
| İşletim Sıcaklığı | 0C to +70C (commercial grade, distributor-listed) | — |
| Power Dissipation (N package, TA=25C) | 1150 mW (datasheet dissipation table) | — |
| RoHS Durumu | Compliant (distributor-listed) | [DATA_NEEDED: RoHS status] |
| Device Type | — | Quadruple RS-232 line receiver |
| Number of Receiver Channels | — | 4 channels |
| Receiver Architecture | — | Monolithic low-power Schottky |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Input Hysteresis | — | Built-in double thresholds |
| Response-Control Configuration | — | Resistor or resistor and bias-voltage source |
| Interface Standard | — | TIA/EIA-232-F |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |
| Durağan Akım | — | [DATA_NEEDED: quiescent current] |
| Output Logic Levels | — | [DATA_NEEDED: output logic voltage levels] |
| Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| REACH Status | — | [DATA_NEEDED: REACH status] |