MC1489NE4 vs MC1489N Perbandingan
Perbandingan bersamaan detil MC1489NE4 dari Texas Instruments dan MC1489N dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MC1489NE4 | MC1489N |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | Quadruple RS-232 line receiver | — |
| Number of Receivers | 4 | — |
| Protocol | EIA/TIA-232-F (RS-232) | — |
| Supply Voltage (nominal) | 5 V | — |
| Supply Voltage (max, distributor-listed) | 5.5 V | — |
| Input Signal Range | ±30 V | -30 V to +30 V |
| Input Resistance | 3.0 kOhm to 7.0 kOhm | 7 kΩ |
| Receive Delay (typ, distributor-listed) | 85 ns | — |
| Response Control | Separate CONT terminal per receiver | One response-control terminal per receiver |
| Tipe Output | TTL/CMOS-compatible logic level | — |
| Technology | Monolithic low-power Schottky bipolar | — |
| Paket | 14-PDIP (N) | 14-pin PDIP |
| Tipe Mounting | Through-Hole | Through-hole |
| Suhu Kerja | 0C to +70C (commercial grade, distributor-listed) | — |
| Power Dissipation (N package, TA=25C) | 1150 mW (datasheet dissipation table) | — |
| Status RoHS | Compliant (distributor-listed) | [DATA_NEEDED: RoHS status] |
| Device Type | — | Quadruple RS-232 line receiver |
| Number of Receiver Channels | — | 4 channels |
| Receiver Architecture | — | Monolithic low-power Schottky |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Input Hysteresis | — | Built-in double thresholds |
| Response-Control Configuration | — | Resistor or resistor and bias-voltage source |
| Interface Standard | — | TIA/EIA-232-F |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Arus Memerintah | — | [DATA_NEEDED: quiescent current] |
| Output Logic Levels | — | [DATA_NEEDED: output logic voltage levels] |
| Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| REACH Status | — | [DATA_NEEDED: REACH status] |