MMA2204KEGR2 vs MMA2201KEGR2 Vergleich
Detaillierter Direktvergleich von MMA2204KEGR2 von NXP Semiconductors und MMA2201KEGR2 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MMA2201KEGR2 - ±40g X-Axis MEMS Accelerometer, 5V, SOIC-16 | NXP
MMA2201KEGR2 ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | MMA2204KEGR2 | MMA2201KEGR2 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Motion Sensors | Motion Sensors |
| Lebenszyklusstatus | NRND | Letzte Kaufgelegenheit |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,60 | $8,95 |
| Sensortyp | MEMS Capacitive Accelerometer | Accelerometer, Single Axis (X) |
| Sensing Axis | X-Axis (single axis) | — |
| Full-Scale Range | ±100 g | ±40 g |
| Sensitivity | 20 mV/g (nominal) | 50 mV/g nominal (ratiometric with VDD) |
| Sensitivity Tolerance | ±5% (typical) | 47.5 mV/g to 52.5 mV/g |
| Bandwidth | 400 Hz (4-pole low-pass filter) | — |
| Versorgungsspannung | 4.75 V to 5.25 V | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical quiescent current] |
| Ausgangstyp | Analog, ratiometric to VDD | Analog, ratiometric |
| Zero-g Output | 2.5 V (nominal, ratiometric) | — |
| Betriebstemperatur | -40 °C to +125 °C | -40 °C to +125 °C |
| Gehäuse | 16-SOIC (300 mil) | 16-pin SOIC (SOIC-16, surface mount) |
| Montageart | Surface Mount | — |
| Self-Test Pin | Yes (per MMA2xxx datasheet convention) | — |
| MSL-Level | [DATA_NEEDED: MSL level] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant (per Mouser listing) |
| Output Impedance | [DATA_NEEDED: output impedance] | — |
| Rauschdichte | [DATA_NEEDED: noise density] | — |
| Nonlinearity | [DATA_NEEDED: nonlinearity %FSO] | — |
| Cross-Axis Sensitivity | [DATA_NEEDED: cross-axis sensitivity] | — |
| Technology | — | MEMS, capacitive sensing |
| Supply Voltage (VDD) | — | 4.75 V to 5.25 V |
| Ausgangsspannungsbereich | — | [DATA_NEEDED: full-scale VOUT swing] |
| Bandwidth (-3 dB) | — | 400 Hz |
| Filter | — | 4-pole low-pass (on-chip) |
| Self-Test | — | Yes (logic-level pin) |
| Temperature Compensation | — | On-chip |
| Zero-g Offset | — | [DATA_NEEDED: zero-g output voltage at 25 °C] |
| Noise | — | [DATA_NEEDED: output noise density] |