MMA2204KEGR2 vs MMA2201KEGR2 Comparaison
Comparaison détaillée côte à côte de MMA2204KEGR2 par NXP Semiconductors et MMA2201KEGR2 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MMA2201KEGR2 - ±40g X-Axis MEMS Accelerometer, 5V, SOIC-16 | NXP
MMA2201KEGR2 ⚠ Dernier achatComparaison des spécifications
| Paramètre | MMA2204KEGR2 | MMA2201KEGR2 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motion Sensors | Motion Sensors |
| Statut du cycle de vie | NRND | Dernier achat |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,60 | $8,95 |
| Type de capteur | MEMS Capacitive Accelerometer | Accelerometer, Single Axis (X) |
| Sensing Axis | X-Axis (single axis) | — |
| Full-Scale Range | ±100 g | ±40 g |
| Sensitivity | 20 mV/g (nominal) | 50 mV/g nominal (ratiometric with VDD) |
| Sensitivity Tolerance | ±5% (typical) | 47.5 mV/g to 52.5 mV/g |
| Bandwidth | 400 Hz (4-pole low-pass filter) | — |
| Tension d'alimentation | 4.75 V to 5.25 V | — |
| Courant d'alimentation | [DATA_NEEDED: supply current] | [DATA_NEEDED: typical quiescent current] |
| Type de sortie | Analog, ratiometric to VDD | Analog, ratiometric |
| Zero-g Output | 2.5 V (nominal, ratiometric) | — |
| Température de fonctionnement | -40 °C to +125 °C | -40 °C to +125 °C |
| Boîtier | 16-SOIC (300 mil) | 16-pin SOIC (SOIC-16, surface mount) |
| Type de montage | Surface Mount | — |
| Self-Test Pin | Yes (per MMA2xxx datasheet convention) | — |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant (per Mouser listing) |
| Output Impedance | [DATA_NEEDED: output impedance] | — |
| Densité de bruit | [DATA_NEEDED: noise density] | — |
| Nonlinearity | [DATA_NEEDED: nonlinearity %FSO] | — |
| Cross-Axis Sensitivity | [DATA_NEEDED: cross-axis sensitivity] | — |
| Technology | — | MEMS, capacitive sensing |
| Supply Voltage (VDD) | — | 4.75 V to 5.25 V |
| Plage de tension de sortie | — | [DATA_NEEDED: full-scale VOUT swing] |
| Bandwidth (-3 dB) | — | 400 Hz |
| Filter | — | 4-pole low-pass (on-chip) |
| Self-Test | — | Yes (logic-level pin) |
| Temperature Compensation | — | On-chip |
| Zero-g Offset | — | [DATA_NEEDED: zero-g output voltage at 25 °C] |
| Noise | — | [DATA_NEEDED: output noise density] |