MMA8452QR1 vs MMA9553LR1 Vergleich
Detaillierter Direktvergleich von MMA8452QR1 von NXP Semiconductors und MMA9553LR1 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MMA8452QR1 - 3-Axis 12-bit Digital Accelerometer I2C | NXP | QFN-16
MMA8452QR1 ObsoleteNXP Semiconductors
MMA9553LR1 - 3-Axis MEMS Accelerometer w/ MCU | NXP | Pedometer Platform
MMA9553LR1 NrndSpezifikationsvergleich
| Parameter | MMA8452QR1 | MMA9553LR1 |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Motion Sensors | Motion Sensors |
| Lebenszyklusstatus | Obsolete | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,40 | $3,21 |
| Sensortyp | 3-Axis Capacitive MEMS Accelerometer | — |
| Auflösung | 12-bit / 8-bit selectable | — |
| Full-Scale Range | ±2g / ±4g / ±8g (user selectable) | — |
| Output Interface | I2C (up to 400 kHz) | — |
| Supply Voltage (VDD) | 1.91 V to 3.6 V | 1.71 V to 1.89 V (typical 1.8 V) |
| Supply Voltage (VDDIO) | 1.62 V to 3.6 V | — |
| Ausgangsdatenrate (ODR) | 0.78 Hz to 400 Hz | — |
| Standby Current | 6 uA typical | — |
| Active Current | [DATA_NEEDED: active current at 100 Hz ODR] | — |
| Interrupt Pins | 2 (INT1, INT2, programmable) | — |
| Betriebstemperatur | -40 C to +85 C | -40 °C to +85 °C |
| Gehäuse | 16-QFN (3x3 mm) with exposed pad | 16-LGA (3x3 mm) |
| Montageart | Surface Mount | Surface Mount |
| Axes Measured | X, Y, Z | — |
| Embedded Functions | Orientation, Free-fall, Motion, Transient, Pulse, FIFO | — |
| MSL-Level | MSL1 per JEDEC J-STD-020 | — |
| I2C Address | 0x1D / 0x1C (configurable SA0 pin) | — |
| Type | — | Accelerometer with embedded MCU (Motion-Sensing Platform) |
| Sensing Axes | — | X, Y, Z |
| Acceleration Range | — | ±2 g, ±4 g, ±8 g (selectable) |
| Bandwidth / Output Data Rate | — | 1.9 Hz to 244 Hz |
| Sensitivity | — | [DATA_NEEDED: counts/g per range] |
| Ausgangstyp | — | Digital (I2C/SPI) |
| Versorgungsstrom | — | [DATA_NEEDED: uA at ODR] |
| Schnittstelle | — | I2C / SPI-compatible |
| Embedded MCU | — | 32-bit low-power MCU |
| On-chip Memory | — | Flash (size per datasheet family) |
| Integrated Features | — | Pedometer firmware, gesture/tilt detection, sensor-hub mode |
| RoHS-Status | — | Compliant |