MMA8452QR1 vs MMA9553LR1 Comparación
Comparación detallada lado a lado de MMA8452QR1 por NXP Semiconductors y MMA9553LR1 por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
MMA8452QR1 - 3-Axis 12-bit Digital Accelerometer I2C | NXP | QFN-16
MMA8452QR1 ObsoleteNXP Semiconductors
MMA9553LR1 - 3-Axis MEMS Accelerometer w/ MCU | NXP | Pedometer Platform
MMA9553LR1 NrndComparación de especificaciones
| Parámetro | MMA8452QR1 | MMA9553LR1 |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Motion Sensors | Motion Sensors |
| Estado del ciclo de vida | Obsolete | NRND |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,40 | $3,21 |
| Tipo de sensor | 3-Axis Capacitive MEMS Accelerometer | — |
| Resolución | 12-bit / 8-bit selectable | — |
| Full-Scale Range | ±2g / ±4g / ±8g (user selectable) | — |
| Output Interface | I2C (up to 400 kHz) | — |
| Supply Voltage (VDD) | 1.91 V to 3.6 V | 1.71 V to 1.89 V (typical 1.8 V) |
| Supply Voltage (VDDIO) | 1.62 V to 3.6 V | — |
| Velocidad de datos de salida (ODR) | 0.78 Hz to 400 Hz | — |
| Standby Current | 6 uA typical | — |
| Active Current | [DATA_NEEDED: active current at 100 Hz ODR] | — |
| Interrupt Pins | 2 (INT1, INT2, programmable) | — |
| Temperatura de funcionamiento | -40 C to +85 C | -40 °C to +85 °C |
| Encapsulado | 16-QFN (3x3 mm) with exposed pad | 16-LGA (3x3 mm) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Axes Measured | X, Y, Z | — |
| Embedded Functions | Orientation, Free-fall, Motion, Transient, Pulse, FIFO | — |
| Nivel MSL | MSL1 per JEDEC J-STD-020 | — |
| I2C Address | 0x1D / 0x1C (configurable SA0 pin) | — |
| Type | — | Accelerometer with embedded MCU (Motion-Sensing Platform) |
| Sensing Axes | — | X, Y, Z |
| Acceleration Range | — | ±2 g, ±4 g, ±8 g (selectable) |
| Bandwidth / Output Data Rate | — | 1.9 Hz to 244 Hz |
| Sensitivity | — | [DATA_NEEDED: counts/g per range] |
| Tipo de salida | — | Digital (I2C/SPI) |
| Corriente de alimentación | — | [DATA_NEEDED: uA at ODR] |
| Interfaz | — | I2C / SPI-compatible |
| Embedded MCU | — | 32-bit low-power MCU |
| On-chip Memory | — | Flash (size per datasheet family) |
| Integrated Features | — | Pedometer firmware, gesture/tilt detection, sensor-hub mode |
| Estado RoHS | — | Compliant |