MMA8452QR1 vs MMA9553LR1 Comparaison
Comparaison détaillée côte à côte de MMA8452QR1 par NXP Semiconductors et MMA9553LR1 par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MMA8452QR1 - 3-Axis 12-bit Digital Accelerometer I2C | NXP | QFN-16
MMA8452QR1 ObsoleteNXP Semiconductors
MMA9553LR1 - 3-Axis MEMS Accelerometer w/ MCU | NXP | Pedometer Platform
MMA9553LR1 NrndComparaison des spécifications
| Paramètre | MMA8452QR1 | MMA9553LR1 |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Motion Sensors | Motion Sensors |
| Statut du cycle de vie | Obsolete | NRND |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,40 | $3,21 |
| Type de capteur | 3-Axis Capacitive MEMS Accelerometer | — |
| Résolution | 12-bit / 8-bit selectable | — |
| Full-Scale Range | ±2g / ±4g / ±8g (user selectable) | — |
| Output Interface | I2C (up to 400 kHz) | — |
| Supply Voltage (VDD) | 1.91 V to 3.6 V | 1.71 V to 1.89 V (typical 1.8 V) |
| Supply Voltage (VDDIO) | 1.62 V to 3.6 V | — |
| Débit de données de sortie (ODR) | 0.78 Hz to 400 Hz | — |
| Standby Current | 6 uA typical | — |
| Active Current | [DATA_NEEDED: active current at 100 Hz ODR] | — |
| Interrupt Pins | 2 (INT1, INT2, programmable) | — |
| Température de fonctionnement | -40 C to +85 C | -40 °C to +85 °C |
| Boîtier | 16-QFN (3x3 mm) with exposed pad | 16-LGA (3x3 mm) |
| Type de montage | Surface Mount | Surface Mount |
| Axes Measured | X, Y, Z | — |
| Embedded Functions | Orientation, Free-fall, Motion, Transient, Pulse, FIFO | — |
| Niveau MSL | MSL1 per JEDEC J-STD-020 | — |
| I2C Address | 0x1D / 0x1C (configurable SA0 pin) | — |
| Type | — | Accelerometer with embedded MCU (Motion-Sensing Platform) |
| Sensing Axes | — | X, Y, Z |
| Acceleration Range | — | ±2 g, ±4 g, ±8 g (selectable) |
| Bandwidth / Output Data Rate | — | 1.9 Hz to 244 Hz |
| Sensitivity | — | [DATA_NEEDED: counts/g per range] |
| Type de sortie | — | Digital (I2C/SPI) |
| Courant d'alimentation | — | [DATA_NEEDED: uA at ODR] |
| Interface | — | I2C / SPI-compatible |
| Embedded MCU | — | 32-bit low-power MCU |
| On-chip Memory | — | Flash (size per datasheet family) |
| Integrated Features | — | Pedometer firmware, gesture/tilt detection, sensor-hub mode |
| Statut RoHS | — | Compliant |