MPX2102A vs MPX2102AP Vergleich
Detaillierter Direktvergleich von MPX2102A von NXP Semiconductors und MPX2102AP von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPX2102A - 100 kPa Absolute Pressure Sensor | NXP Semiconductors
MPX2102A ObsoleteSTMicroelectronics
MPX2102AP - 100kPa Absolute Pressure Sensor 4-SIP | STMicroelectronics
MPX2102AP ✓ AktivSpezifikationsvergleich
| Parameter | MPX2102A | MPX2102AP |
|---|---|---|
| Marke | NXP Semiconductors | STMicroelectronics |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Obsolete | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,95 | $9,50 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 20 kPa to 100 kPa | 14.5 PSI (100 kPa) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Ausgangstyp | Analog voltage (Wheatstone bridge, differential) | Analog Wheatstone Bridge |
| Output Span | 0 mV to 40 mV at 10 V supply | — |
| Supply Voltage (Excitation) | 10 V typical | — |
| Pressure Linearity | [DATA_NEEDED: % of full scale - verify in datasheet] | — |
| Betriebstemperaturbereich | -40C to +125C | — |
| Gehäuse / Bauform | 4-SIP Module (Case 344-15), through-hole | — |
| Montageart | Through-Hole (SIP) | Through-Hole |
| Port Style | Barbed pressure port (axial) | — |
| Technology | Silicon piezoresistive (MEMS) with on-chip thin-film compensation | — |
| Temperature Compensation | On-chip (laser trimmed) -40C to +125C | — |
| Bridge Resistance | [DATA_NEEDED: input/output bridge resistance] | — |
| Response Time | [DATA_NEEDED: response time in ms] | [DATA_NEEDED: response time ms] |
| RoHS-Status | Compliant (per NXP product page) | Compliant |
| MSL-Level | Not applicable (through-hole, no moisture sensitivity rating) | — |
| Maximum Overload Pressure | — | 14.5 PSI (100 kPa) |
| Port Type | — | Male - 0.19" (4.93 mm) Tube |
| Ausgangsspannung | — | 0 mV to 40 mV at 10 V excitation |
| Versorgungsspannung | — | 10 V (typical ratiometric) |
| Linearity | — | ±0.5% (typ) |
| Betriebstemperatur | — | 0 °C to +85 °C |
| Gehäuse | — | 4-SIP Module (Unibody) |
| Diaphragm Technology | — | Silicon Piezoresistive |
| Style | — | Tube Port |