MPX2102A vs MPX2102AP Comparación
Comparación detallada lado a lado de MPX2102A por NXP Semiconductors y MPX2102AP por STMicroelectronics. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
MPX2102A - 100 kPa Absolute Pressure Sensor | NXP Semiconductors
MPX2102A ObsoleteSTMicroelectronics
MPX2102AP - 100kPa Absolute Pressure Sensor 4-SIP | STMicroelectronics
MPX2102AP ✓ ActivoComparación de especificaciones
| Parámetro | MPX2102A | MPX2102AP |
|---|---|---|
| Marca | NXP Semiconductors | STMicroelectronics |
| Categoría | Pressure Sensors | Pressure Sensors |
| Estado del ciclo de vida | Obsolete | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $10,95 | $9,50 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 20 kPa to 100 kPa | 14.5 PSI (100 kPa) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Tipo de salida | Analog voltage (Wheatstone bridge, differential) | Analog Wheatstone Bridge |
| Output Span | 0 mV to 40 mV at 10 V supply | — |
| Supply Voltage (Excitation) | 10 V typical | — |
| Pressure Linearity | [DATA_NEEDED: % of full scale - verify in datasheet] | — |
| Rango de temperatura de funcionamiento | -40C to +125C | — |
| Encapsulado / Carcasa | 4-SIP Module (Case 344-15), through-hole | — |
| Tipo de montaje | Through-Hole (SIP) | Through-Hole |
| Port Style | Barbed pressure port (axial) | — |
| Technology | Silicon piezoresistive (MEMS) with on-chip thin-film compensation | — |
| Temperature Compensation | On-chip (laser trimmed) -40C to +125C | — |
| Bridge Resistance | [DATA_NEEDED: input/output bridge resistance] | — |
| Response Time | [DATA_NEEDED: response time in ms] | [DATA_NEEDED: response time ms] |
| Estado RoHS | Compliant (per NXP product page) | Compliant |
| Nivel MSL | Not applicable (through-hole, no moisture sensitivity rating) | — |
| Maximum Overload Pressure | — | 14.5 PSI (100 kPa) |
| Port Type | — | Male - 0.19" (4.93 mm) Tube |
| Tensión de salida | — | 0 mV to 40 mV at 10 V excitation |
| Tensión de alimentación | — | 10 V (typical ratiometric) |
| Linearity | — | ±0.5% (typ) |
| Temperatura de funcionamiento | — | 0 °C to +85 °C |
| Encapsulado | — | 4-SIP Module (Unibody) |
| Diaphragm Technology | — | Silicon Piezoresistive |
| Style | — | Tube Port |