MPX2102A vs MPX2102AP Comparaison
Comparaison détaillée côte à côte de MPX2102A par NXP Semiconductors et MPX2102AP par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPX2102A - 100 kPa Absolute Pressure Sensor | NXP Semiconductors
MPX2102A ObsoleteSTMicroelectronics
MPX2102AP - 100kPa Absolute Pressure Sensor 4-SIP | STMicroelectronics
MPX2102AP ✓ ActifComparaison des spécifications
| Paramètre | MPX2102A | MPX2102AP |
|---|---|---|
| Marque | NXP Semiconductors | STMicroelectronics |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Obsolete | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,95 | $9,50 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 20 kPa to 100 kPa | 14.5 PSI (100 kPa) |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Type de sortie | Analog voltage (Wheatstone bridge, differential) | Analog Wheatstone Bridge |
| Output Span | 0 mV to 40 mV at 10 V supply | — |
| Supply Voltage (Excitation) | 10 V typical | — |
| Pressure Linearity | [DATA_NEEDED: % of full scale - verify in datasheet] | — |
| Plage de température de fonctionnement | -40C to +125C | — |
| Boîtier / Format | 4-SIP Module (Case 344-15), through-hole | — |
| Type de montage | Through-Hole (SIP) | Through-Hole |
| Port Style | Barbed pressure port (axial) | — |
| Technology | Silicon piezoresistive (MEMS) with on-chip thin-film compensation | — |
| Temperature Compensation | On-chip (laser trimmed) -40C to +125C | — |
| Bridge Resistance | [DATA_NEEDED: input/output bridge resistance] | — |
| Response Time | [DATA_NEEDED: response time in ms] | [DATA_NEEDED: response time ms] |
| Statut RoHS | Compliant (per NXP product page) | Compliant |
| Niveau MSL | Not applicable (through-hole, no moisture sensitivity rating) | — |
| Maximum Overload Pressure | — | 14.5 PSI (100 kPa) |
| Port Type | — | Male - 0.19" (4.93 mm) Tube |
| Tension de sortie | — | 0 mV to 40 mV at 10 V excitation |
| Tension d'alimentation | — | 10 V (typical ratiometric) |
| Linearity | — | ±0.5% (typ) |
| Température de fonctionnement | — | 0 °C to +85 °C |
| Boîtier | — | 4-SIP Module (Unibody) |
| Diaphragm Technology | — | Silicon Piezoresistive |
| Style | — | Tube Port |