MPX2200AP vs MPX2200D Vergleich
Detaillierter Direktvergleich von MPX2200AP von NXP Semiconductors und MPX2200D von STMicroelectronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
MPX2200D - 200kPa Differential Pressure Sensor 4-SIP | STMicroelectronics
MPX2200D ✓ AktivSpezifikationsvergleich
| Parameter | MPX2200AP | MPX2200D |
|---|---|---|
| Marke | NXP Semiconductors | STMicroelectronics |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | NRND | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,40 | $5,40 |
| Pressure Type | Absolute | Differential |
| Operating Pressure Range | 0 kPa to 200 kPa (0 to 29.01 PSI) | — |
| Ausgangstyp | Analog voltage (Wheatstone bridge) | Analog Wheatstone Bridge |
| Ausgangsspannungsbereich | 0 mV to 40 mV (at 10 V excitation) | — |
| Sensitivity | 0.2 mV/V typical | — |
| Excitation Voltage | 10 V (max 16 V) | — |
| Pressure Port | Axial male tube 0.19 inch (4.93 mm) | — |
| Gehäuse | 4-SIP Module (through-hole) | — |
| Montageart | Through-Hole | Through-Hole |
| Betriebstemperatur | -40C to +125C | -40C to +125C |
| Compensated Temperature | 0C to 85C | — |
| Technology | Silicon piezoresistive (on-chip temperature compensated) | Silicon piezoresistive MEMS |
| Sensor Grade | A grade (high accuracy) | — |
| Non-Linearity | [DATA_NEEDED: Non-Linearity] | — |
| RoHS-Status | Check distributor listing - legacy part | Compliant |
| Operating Pressure | — | 29.01 PSI (200 kPa) |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Ausgangsspannung | — | 0 mV to 40 mV at 200 kPa, 10 V supply |
| Versorgungsspannung | — | 10 V typical (16 V maximum) |
| Versorgungsstrom | — | 6 mA typical |
| Linearity | — | ±0.25% (typical) |
| Pressure Hysteresis | — | ±1% maximum |
| Temperature Compensation | — | 0C to +85C (on-chip) |
| Port Size | — | Female, 0.136 in (3.4544 mm), barbed |
| Gehäuse / Bauform | — | 4-SIP Module (Case 344-15) |
| Termination Style | — | Through-Hole PCB |