MPX2202DP vs MPX2010DP Vergleich
Detaillierter Direktvergleich von MPX2202DP von NXP Semiconductors und MPX2010DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX2202DP | MPX2010DP |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $25,14 | $8,50 |
| Pressure Range | 0 to 200 kPa (0 to 29.01 PSI) | 0 to 10 kPa (0 to 1.45 PSI) |
| Pressure Type | Differential (dual port, tube inlet) | — |
| Versorgungsspannung | 10 V typical | 10 V DC typical (max 16 V) |
| Full-Scale Span | 40 mV typical at 10 V supply | — |
| Offset | 0 mV typical | — |
| Linearity | 1.0% typical | ±0.05% (typ) |
| Pressure Hysteresis | 2.0% maximum | — |
| Temperature Compensated Range | 0 C to 85 C | — |
| Gehäuse / Bauform | 4-SIP Module (Case 867C) | — |
| Port Type | Dual tube, male, 0.19" (4.93 mm) tube | — |
| Betriebstemperatur | -40 C to +125 C [DATA_NEEDED: confirm exact op-temp range from datasheet] | -40 °C to +125 °C |
| Ausgangstyp | Analog differential voltage | Analog voltage, Wheatstone bridge (mV level) |
| Technology | Silicon piezoresistive, on-chip temperature compensated and calibrated | Piezoresistive (silicon strain gauge bridge) |
| Montageart | Through-hole (4-SIP tube inlet) | — |
| RoHS-Status | RoHS compliant | Compliant |
| Sensortyp | — | Differential Pressure Sensor |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |