MPX2202DP vs MPX2010DP Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MPX2202DP sa pamamagitan ng NXP Semiconductors at MPX2010DP sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
NXP Semiconductors
MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro
MPX2010DP ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MPX2202DP | MPX2010DP |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Pressure Sensors | Pressure Sensors |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Pressure Range | 0 to 200 kPa (0 to 29.01 PSI) | 0 to 10 kPa (0 to 1.45 PSI) |
| Pressure Type | Differential (dual port, tube inlet) | — |
| Volte ng Pagbibigay | 10 V typical | 10 V DC typical (max 16 V) |
| Full-Scale Span | 40 mV typical at 10 V supply | — |
| Offset | 0 mV typical | — |
| Linearity | 1.0% typical | ±0.05% (typ) |
| Pressure Hysteresis | 2.0% maximum | — |
| Temperature Compensated Range | 0 C to 85 C | — |
| Packhaging / Kaso | 4-SIP Module (Case 867C) | — |
| Port Type | Dual tube, male, 0.19" (4.93 mm) tube | — |
| Temperature na Operasyon | -40 C to +125 C [DATA_NEEDED: confirm exact op-temp range from datasheet] | -40 °C to +125 °C |
| Type ng Output | Analog differential voltage | Analog voltage, Wheatstone bridge (mV level) |
| Technology | Silicon piezoresistive, on-chip temperature compensated and calibrated | Piezoresistive (silicon strain gauge bridge) |
| Uri ng Pagpapasok | Through-hole (4-SIP tube inlet) | — |
| Tindminan RoHS | RoHS compliant | Compliant |
| Type ng Sensor | — | Differential Pressure Sensor |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |