MPX2202DP vs MPX2202ASX Vergleich
Detaillierter Direktvergleich von MPX2202DP von NXP Semiconductors und MPX2202ASX von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX2202DP | MPX2202ASX |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $25,14 | $10,45 |
| Pressure Range | 0 to 200 kPa (0 to 29.01 PSI) | — |
| Pressure Type | Differential (dual port, tube inlet) | Absolute (vs. sealed vacuum reference) |
| Versorgungsspannung | 10 V typical | — |
| Full-Scale Span | 40 mV typical at 10 V supply | — |
| Offset | 0 mV typical | — |
| Linearity | 1.0% typical | — |
| Pressure Hysteresis | 2.0% maximum | — |
| Temperature Compensated Range | 0 C to 85 C | — |
| Gehäuse / Bauform | 4-SIP Module (Case 867C) | 4-SIP Module (through-hole) |
| Port Type | Dual tube, male, 0.19" (4.93 mm) tube | — |
| Betriebstemperatur | -40 C to +125 C [DATA_NEEDED: confirm exact op-temp range from datasheet] | — |
| Ausgangstyp | Analog differential voltage | Analog Voltage (Wheatstone bridge differential) |
| Technology | Silicon piezoresistive, on-chip temperature compensated and calibrated | — |
| Montageart | Through-hole (4-SIP tube inlet) | Through-Hole |
| RoHS-Status | RoHS compliant | unknown |
| Sensortyp | — | Absolute Pressure Sensor |
| Operating Pressure Range | — | 0 kPa to 200 kPa (0 PSI to 29.01 PSI) |
| Maximum Overpressure | — | 58.02 PSI (400 kPa) |
| Output Voltage Span | — | 0 mV to 40 mV at 10 V excitation |
| Excitation Voltage | — | 10 V (typical) |
| Pressure Port | — | Male 0.19 inch (4.93 mm) barbed tube |
| Sensing Technology | — | Silicon piezoresistive, on-chip temperature compensated & calibrated |
| Temperature Compensation | — | 0 C to +85 C (on-chip) |
| Linearity / Hysteresis | — | approximately 1.0 %VFSS max [DATA_NEEDED: exact spec from datasheet] |
| Port / Termination | — | Solder |
| Pin-Anzahl | — | 4 |
| Compatible Media | — | Dry non-corrosive gases (air) |