MPX2202DP vs MPX2202ASX Comparación
Comparación detallada lado a lado de MPX2202DP por NXP Semiconductors y MPX2202ASX por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | MPX2202DP | MPX2202ASX |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | Pressure Sensors | Pressure Sensors |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $25,14 | $10,45 |
| Pressure Range | 0 to 200 kPa (0 to 29.01 PSI) | — |
| Pressure Type | Differential (dual port, tube inlet) | Absolute (vs. sealed vacuum reference) |
| Tensión de alimentación | 10 V typical | — |
| Full-Scale Span | 40 mV typical at 10 V supply | — |
| Offset | 0 mV typical | — |
| Linearity | 1.0% typical | — |
| Pressure Hysteresis | 2.0% maximum | — |
| Temperature Compensated Range | 0 C to 85 C | — |
| Encapsulado / Carcasa | 4-SIP Module (Case 867C) | 4-SIP Module (through-hole) |
| Port Type | Dual tube, male, 0.19" (4.93 mm) tube | — |
| Temperatura de funcionamiento | -40 C to +125 C [DATA_NEEDED: confirm exact op-temp range from datasheet] | — |
| Tipo de salida | Analog differential voltage | Analog Voltage (Wheatstone bridge differential) |
| Technology | Silicon piezoresistive, on-chip temperature compensated and calibrated | — |
| Tipo de montaje | Through-hole (4-SIP tube inlet) | Through-Hole |
| Estado RoHS | RoHS compliant | unknown |
| Tipo de sensor | — | Absolute Pressure Sensor |
| Operating Pressure Range | — | 0 kPa to 200 kPa (0 PSI to 29.01 PSI) |
| Maximum Overpressure | — | 58.02 PSI (400 kPa) |
| Output Voltage Span | — | 0 mV to 40 mV at 10 V excitation |
| Excitation Voltage | — | 10 V (typical) |
| Pressure Port | — | Male 0.19 inch (4.93 mm) barbed tube |
| Sensing Technology | — | Silicon piezoresistive, on-chip temperature compensated & calibrated |
| Temperature Compensation | — | 0 C to +85 C (on-chip) |
| Linearity / Hysteresis | — | approximately 1.0 %VFSS max [DATA_NEEDED: exact spec from datasheet] |
| Port / Termination | — | Solder |
| Recuento de pines | — | 4 |
| Compatible Media | — | Dry non-corrosive gases (air) |