MPX2202DP vs MPX2202ASX Comparaison
Comparaison détaillée côte à côte de MPX2202DP par NXP Semiconductors et MPX2202ASX par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MPX2202DP | MPX2202ASX |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $25,14 | $10,45 |
| Pressure Range | 0 to 200 kPa (0 to 29.01 PSI) | — |
| Pressure Type | Differential (dual port, tube inlet) | Absolute (vs. sealed vacuum reference) |
| Tension d'alimentation | 10 V typical | — |
| Full-Scale Span | 40 mV typical at 10 V supply | — |
| Offset | 0 mV typical | — |
| Linearity | 1.0% typical | — |
| Pressure Hysteresis | 2.0% maximum | — |
| Temperature Compensated Range | 0 C to 85 C | — |
| Boîtier / Format | 4-SIP Module (Case 867C) | 4-SIP Module (through-hole) |
| Port Type | Dual tube, male, 0.19" (4.93 mm) tube | — |
| Température de fonctionnement | -40 C to +125 C [DATA_NEEDED: confirm exact op-temp range from datasheet] | — |
| Type de sortie | Analog differential voltage | Analog Voltage (Wheatstone bridge differential) |
| Technology | Silicon piezoresistive, on-chip temperature compensated and calibrated | — |
| Type de montage | Through-hole (4-SIP tube inlet) | Through-Hole |
| Statut RoHS | RoHS compliant | unknown |
| Type de capteur | — | Absolute Pressure Sensor |
| Operating Pressure Range | — | 0 kPa to 200 kPa (0 PSI to 29.01 PSI) |
| Maximum Overpressure | — | 58.02 PSI (400 kPa) |
| Output Voltage Span | — | 0 mV to 40 mV at 10 V excitation |
| Excitation Voltage | — | 10 V (typical) |
| Pressure Port | — | Male 0.19 inch (4.93 mm) barbed tube |
| Sensing Technology | — | Silicon piezoresistive, on-chip temperature compensated & calibrated |
| Temperature Compensation | — | 0 C to +85 C (on-chip) |
| Linearity / Hysteresis | — | approximately 1.0 %VFSS max [DATA_NEEDED: exact spec from datasheet] |
| Port / Termination | — | Solder |
| Nombre de broches | — | 4 |
| Compatible Media | — | Dry non-corrosive gases (air) |