MPX5100AP vs MPX4115AP Vergleich
Detaillierter Direktvergleich von MPX5100AP von NXP Semiconductors und MPX4115AP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPX5100AP | MPX4115AP |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $12,03 | $12,03 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 15 kPa to 115 kPa (2.18 psi to 16.68 psi) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Output Voltage Span | 0.2 V to 4.7 V at VCC = 5.0 V | — |
| Supply Voltage (VCC) | 5.0 V typical (4.75 V to 5.25 V) | — |
| Versorgungsstrom | 10 mA typical | 6 mA typical |
| Pressure Accuracy | +/- 2.5% (0 C to 85 C) | — |
| Temperature Compensated Range | 0 C to +85 C | — |
| Betriebstemperaturbereich | -40 C to +125 C | -40 C to +125 C |
| Response Time | 1 ms typical | — |
| Ausgangstyp | Analog, ratiometric | Analog Voltage (ratiometric) |
| Port Style | Axial port with 0.19 in (4.93 mm) tube | — |
| Gehäuse | 6-SIP Module (Case 867B-04) | — |
| Montageart | Through-Hole (SIP) | Through Hole |
| Technology | Piezoresistive MEMS with bipolar ASIC | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| Sensitivity | — | 45.9 mV/kPa |
| Ausgangsspannungsbereich | — | 0.20 V to 4.80 V |
| Versorgungsspannung | — | 5.1 V typical (4.85 V to 5.35 V range) |
| Linearity | — | 0.2% to 1.5% (depending on operating conditions) |
| Compensated Temperature Range | — | 0 C to +85 C |
| Gehäuse / Bauform | — | 6-SIP Module (Case 867B-04) |
| Pressure Port | — | Male - 0.19" (4.93 mm) Tube |
| Termination | — | Solder (SIP pins) |
| Signal Conditioning | — | On-chip bipolar op-amp + thin-film calibration resistors |
| Min Order Quantity | — | 200 (per NXP product page) |
| Min Package Quantity | — | 20 (Tray) |