MPX5100AP vs MPX4115AP Comparaison
Comparaison détaillée côte à côte de MPX5100AP par NXP Semiconductors et MPX4115AP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MPX5100AP | MPX4115AP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $12,03 | $12,03 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 15 kPa to 115 kPa (2.18 psi to 16.68 psi) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Output Voltage Span | 0.2 V to 4.7 V at VCC = 5.0 V | — |
| Supply Voltage (VCC) | 5.0 V typical (4.75 V to 5.25 V) | — |
| Courant d'alimentation | 10 mA typical | 6 mA typical |
| Pressure Accuracy | +/- 2.5% (0 C to 85 C) | — |
| Temperature Compensated Range | 0 C to +85 C | — |
| Plage de température de fonctionnement | -40 C to +125 C | -40 C to +125 C |
| Response Time | 1 ms typical | — |
| Type de sortie | Analog, ratiometric | Analog Voltage (ratiometric) |
| Port Style | Axial port with 0.19 in (4.93 mm) tube | — |
| Boîtier | 6-SIP Module (Case 867B-04) | — |
| Type de montage | Through-Hole (SIP) | Through Hole |
| Technology | Piezoresistive MEMS with bipolar ASIC | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Sensitivity | — | 45.9 mV/kPa |
| Plage de tension de sortie | — | 0.20 V to 4.80 V |
| Tension d'alimentation | — | 5.1 V typical (4.85 V to 5.35 V range) |
| Linearity | — | 0.2% to 1.5% (depending on operating conditions) |
| Compensated Temperature Range | — | 0 C to +85 C |
| Boîtier / Format | — | 6-SIP Module (Case 867B-04) |
| Pressure Port | — | Male - 0.19" (4.93 mm) Tube |
| Termination | — | Solder (SIP pins) |
| Signal Conditioning | — | On-chip bipolar op-amp + thin-film calibration resistors |
| Min Order Quantity | — | 200 (per NXP product page) |
| Min Package Quantity | — | 20 (Tray) |