MPX5100DP vs MPX5050DP Vergleich
Detaillierter Direktvergleich von MPX5100DP von NXP Semiconductors und MPX5050DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPX5100DP - 0-100kPa Differential Pressure Sensor 5V 6-SIP | NXP
MPX5100DP ✓ AktivSpezifikationsvergleich
| Parameter | MPX5100DP | MPX5050DP |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $12,03 | $8,65 |
| Pressure Type | Differential | — |
| Operating Pressure Range | 0 kPa to 100 kPa (0 to 14.5 PSI) | — |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Supply Voltage (Vcc) | 5 V (nominal) | — |
| Ausgangsspannungsbereich | 0.2 V to 4.7 V (ratiometric, ~4.5 V span) | 0.2 V to 4.7 V |
| Ausgangstyp | Analog, ratiometric to Vcc | Analog ratiometric voltage |
| Accuracy | ±2.5% (0 to 85 °C) | [DATA_NEEDED: full temperature accuracy band] |
| Sensitivity | 45 mV/kPa nominal | 90 mV/kPa typical |
| Betriebstemperatur | -40 °C to +125 °C | -40C to +125C |
| Response Bandwidth | 1 kHz (typical) | — |
| Port Configuration | Dual ports, male 0.19" (4.93 mm) tube, same side | — |
| Gehäuse | 6-SIP Module (through-hole) | 6-SIP Module (SOT1693-1 / Case 1351-01) |
| Signal Conditioning | On-chip amplifier, temperature compensation, calibration | — |
| Technology | Piezoresistive MEMS with bipolar ASIC | — |
| Montageart | Through-Hole (SIP) | Through-Hole (with dual pressure ports) |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Manufacturer | — | NXP Semiconductors |
| Sensortyp | — | Differential Pressure Sensor |
| Operating Principle | — | Piezoresistive (MEMS silicon) |
| Pressure Range | — | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) |
| Pressure Port Type | — | Differential, dual tube port (Male, 0.19" / 4.93 mm Tube) |
| Full-Scale Span | — | 4.5 V typical |
| Versorgungsspannung | — | 5.0 V nominal (4.75 V to 5.25 V) |
| Response Time | — | 1 ms typical |
| Overpressure Rating | — | 200 kPa |
| Versorgungsstrom | — | [DATA_NEEDED: quiescent supply current] |