MPX5100DP vs MPX5050DP Comparación

Comparación detallada lado a lado de MPX5100DP por NXP Semiconductors y MPX5050DP por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

NXP Semiconductors
MPX5050DP MPX5050DP - 50kPa Differential Pressure Sensor 6-SIP | NXP

MPX5050DP - 50kPa Differential Pressure Sensor 6-SIP | NXP

MPX5050DP ✓ Activo

Comparación de especificaciones

Parámetro MPX5100DP MPX5050DP
Marca NXP Semiconductors NXP Semiconductors
Categoría Pressure Sensors Pressure Sensors
Estado del ciclo de vida Activo Activo
Estado del stock In Stock In Stock
Precio unitario (USD) $12,03 $8,65
Pressure Type Differential —
Operating Pressure Range 0 kPa to 100 kPa (0 to 14.5 PSI) —
Maximum Overload Pressure [DATA_NEEDED: maximum overload pressure] —
Supply Voltage (Vcc) 5 V (nominal) —
Rango de tensión de salida 0.2 V to 4.7 V (ratiometric, ~4.5 V span) 0.2 V to 4.7 V
Tipo de salida Analog, ratiometric to Vcc Analog ratiometric voltage
Accuracy ±2.5% (0 to 85 °C) [DATA_NEEDED: full temperature accuracy band]
Sensitivity 45 mV/kPa nominal 90 mV/kPa typical
Temperatura de funcionamiento -40 °C to +125 °C -40C to +125C
Response Bandwidth 1 kHz (typical) —
Port Configuration Dual ports, male 0.19" (4.93 mm) tube, same side —
Encapsulado 6-SIP Module (through-hole) 6-SIP Module (SOT1693-1 / Case 1351-01)
Signal Conditioning On-chip amplifier, temperature compensation, calibration —
Technology Piezoresistive MEMS with bipolar ASIC —
Tipo de montaje Through-Hole (SIP) Through-Hole (with dual pressure ports)
Estado RoHS [DATA_NEEDED: RoHS compliance status] Compliant
Lead-Free [DATA_NEEDED: lead-free status] —
Manufacturer — NXP Semiconductors
Tipo de sensor — Differential Pressure Sensor
Operating Principle — Piezoresistive (MEMS silicon)
Pressure Range — 0 kPa to 50 kPa (0 PSI to 7.25 PSI)
Pressure Port Type — Differential, dual tube port (Male, 0.19" / 4.93 mm Tube)
Full-Scale Span — 4.5 V typical
Tensión de alimentación — 5.0 V nominal (4.75 V to 5.25 V)
Response Time — 1 ms typical
Overpressure Rating — 200 kPa
Corriente de alimentación — [DATA_NEEDED: quiescent supply current]

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización