MPX5100DP vs MPX5050DP Comparaison
Comparaison détaillée côte à côte de MPX5100DP par NXP Semiconductors et MPX5050DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPX5100DP - 0-100kPa Differential Pressure Sensor 5V 6-SIP | NXP
MPX5100DP ✓ ActifComparaison des spécifications
| Paramètre | MPX5100DP | MPX5050DP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $12,03 | $8,65 |
| Pressure Type | Differential | — |
| Operating Pressure Range | 0 kPa to 100 kPa (0 to 14.5 PSI) | — |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Supply Voltage (Vcc) | 5 V (nominal) | — |
| Plage de tension de sortie | 0.2 V to 4.7 V (ratiometric, ~4.5 V span) | 0.2 V to 4.7 V |
| Type de sortie | Analog, ratiometric to Vcc | Analog ratiometric voltage |
| Accuracy | ±2.5% (0 to 85 °C) | [DATA_NEEDED: full temperature accuracy band] |
| Sensitivity | 45 mV/kPa nominal | 90 mV/kPa typical |
| Température de fonctionnement | -40 °C to +125 °C | -40C to +125C |
| Response Bandwidth | 1 kHz (typical) | — |
| Port Configuration | Dual ports, male 0.19" (4.93 mm) tube, same side | — |
| Boîtier | 6-SIP Module (through-hole) | 6-SIP Module (SOT1693-1 / Case 1351-01) |
| Signal Conditioning | On-chip amplifier, temperature compensation, calibration | — |
| Technology | Piezoresistive MEMS with bipolar ASIC | — |
| Type de montage | Through-Hole (SIP) | Through-Hole (with dual pressure ports) |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| Manufacturer | — | NXP Semiconductors |
| Type de capteur | — | Differential Pressure Sensor |
| Operating Principle | — | Piezoresistive (MEMS silicon) |
| Pressure Range | — | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) |
| Pressure Port Type | — | Differential, dual tube port (Male, 0.19" / 4.93 mm Tube) |
| Full-Scale Span | — | 4.5 V typical |
| Tension d'alimentation | — | 5.0 V nominal (4.75 V to 5.25 V) |
| Response Time | — | 1 ms typical |
| Overpressure Rating | — | 200 kPa |
| Courant d'alimentation | — | [DATA_NEEDED: quiescent supply current] |