MPX5100DP vs MPX5100D Vergleich

Detaillierter Direktvergleich von MPX5100DP von NXP Semiconductors und MPX5100D von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Spezifikationsvergleich

Parameter MPX5100DP MPX5100D
Marke NXP Semiconductors NXP Semiconductors
Kategorie Pressure Sensors Pressure Sensors
Lebenszyklusstatus Aktiv Aktiv
Lagerstatus In Stock In Stock
Stückpreis (USD) $12,03 $10,75
Pressure Type Differential Differential
Operating Pressure Range 0 kPa to 100 kPa (0 to 14.5 PSI) —
Maximum Overload Pressure [DATA_NEEDED: maximum overload pressure] —
Supply Voltage (Vcc) 5 V (nominal) —
Ausgangsspannungsbereich 0.2 V to 4.7 V (ratiometric, ~4.5 V span) 0.2 V (zero pressure) to 4.7 V (full-scale)
Ausgangstyp Analog, ratiometric to Vcc Analog Voltage, Ratiometric
Accuracy ±2.5% (0 to 85 °C) ±1.8 %VFSS maximum
Sensitivity 45 mV/kPa nominal —
Betriebstemperatur -40 °C to +125 °C -40 °C to +125 °C
Response Bandwidth 1 kHz (typical) —
Port Configuration Dual ports, male 0.19" (4.93 mm) tube, same side —
Gehäuse 6-SIP Module (through-hole) 6-SIP Module (Case 867)
Signal Conditioning On-chip amplifier, temperature compensation, calibration —
Technology Piezoresistive MEMS with bipolar ASIC —
Montageart Through-Hole (SIP) Through-Hole
RoHS-Status [DATA_NEEDED: RoHS compliance status] Compliant
Lead-Free [DATA_NEEDED: lead-free status] —
Sensortyp — Piezoresistive Pressure Sensor (Differential)
Pressure Range — 0 kPa to 100 kPa (0 PSI to 14.5 PSI)
Versorgungsspannung — 4.75 V to 5.25 V
Versorgungsstrom — [DATA_NEEDED: Supply Current]
Full-Scale Span — 45 mV/kPa typical
Pressure Port — Dual axial tube ports (Differential), 0.19 inch (4.93 mm)
Output Response Time — [DATA_NEEDED: Response Time]
Reflow Compatible — No (through-hole module)
Media Compatibility — Non-corrosive dry gases (filtered dry air recommended)

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern