MPX5100DP vs MPX5100D 比較

詳細並排比較 MPX5100DP 由 NXP Semiconductors 與 MPX5100D 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

NXP Semiconductors
MPX5100DP MPX5100DP - 0-100kPa Differential Pressure Sensor 5V 6-SIP | NXP

MPX5100DP - 0-100kPa Differential Pressure Sensor 5V 6-SIP | NXP

MPX5100DP ✓ 啟用中

規格比較

參數 MPX5100DP MPX5100D
品牌 NXP Semiconductors NXP Semiconductors
類別 Pressure Sensors Pressure Sensors
生命週期狀態 啟用中 啟用中
Pressure Type Differential Differential
Operating Pressure Range 0 kPa to 100 kPa (0 to 14.5 PSI) —
Maximum Overload Pressure [DATA_NEEDED: maximum overload pressure] —
Supply Voltage (Vcc) 5 V (nominal) —
輸出電壓範圍 0.2 V to 4.7 V (ratiometric, ~4.5 V span) 0.2 V (zero pressure) to 4.7 V (full-scale)
輸出類型 Analog, ratiometric to Vcc Analog Voltage, Ratiometric
Accuracy ±2.5% (0 to 85 °C) ±1.8 %VFSS maximum
Sensitivity 45 mV/kPa nominal —
工作溫度 -40 °C to +125 °C -40 °C to +125 °C
Response Bandwidth 1 kHz (typical) —
Port Configuration Dual ports, male 0.19" (4.93 mm) tube, same side —
封裝 6-SIP Module (through-hole) 6-SIP Module (Case 867)
Signal Conditioning On-chip amplifier, temperature compensation, calibration —
Technology Piezoresistive MEMS with bipolar ASIC —
安裝類型 Through-Hole (SIP) Through-Hole
RoHS 狀態 [DATA_NEEDED: RoHS compliance status] Compliant
Lead-Free [DATA_NEEDED: lead-free status] —
感測器類型 — Piezoresistive Pressure Sensor (Differential)
Pressure Range — 0 kPa to 100 kPa (0 PSI to 14.5 PSI)
供應電壓 — 4.75 V to 5.25 V
供應電流 — [DATA_NEEDED: Supply Current]
Full-Scale Span — 45 mV/kPa typical
Pressure Port — Dual axial tube ports (Differential), 0.19 inch (4.93 mm)
Output Response Time — [DATA_NEEDED: Response Time]
Reflow Compatible — No (through-hole module)
Media Compatibility — Non-corrosive dry gases (filtered dry air recommended)

資料表與資源

瀏覽所有產品 建立 BOM 索取報價