MPX5100DP vs MPX5100D Perbandingan

Perbandingan bersamaan detil MPX5100DP dari NXP Semiconductors dan MPX5100D dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum MPX5100DP MPX5100D
Merek NXP Semiconductors NXP Semiconductors
Kategori Pressure Sensors Pressure Sensors
Status Lingkungan Hidup Aktif Aktif
Pressure Type Differential Differential
Operating Pressure Range 0 kPa to 100 kPa (0 to 14.5 PSI) —
Maximum Overload Pressure [DATA_NEEDED: maximum overload pressure] —
Supply Voltage (Vcc) 5 V (nominal) —
Rentang Tegangan Output 0.2 V to 4.7 V (ratiometric, ~4.5 V span) 0.2 V (zero pressure) to 4.7 V (full-scale)
Tipe Output Analog, ratiometric to Vcc Analog Voltage, Ratiometric
Accuracy ±2.5% (0 to 85 °C) ±1.8 %VFSS maximum
Sensitivity 45 mV/kPa nominal —
Suhu Kerja -40 °C to +125 °C -40 °C to +125 °C
Response Bandwidth 1 kHz (typical) —
Port Configuration Dual ports, male 0.19" (4.93 mm) tube, same side —
Paket 6-SIP Module (through-hole) 6-SIP Module (Case 867)
Signal Conditioning On-chip amplifier, temperature compensation, calibration —
Technology Piezoresistive MEMS with bipolar ASIC —
Tipe Mounting Through-Hole (SIP) Through-Hole
Status RoHS [DATA_NEEDED: RoHS compliance status] Compliant
Lead-Free [DATA_NEEDED: lead-free status] —
Tipe Pengukur — Piezoresistive Pressure Sensor (Differential)
Pressure Range — 0 kPa to 100 kPa (0 PSI to 14.5 PSI)
Tegangan Pemuat — 4.75 V to 5.25 V
Arus Pemuat — [DATA_NEEDED: Supply Current]
Full-Scale Span — 45 mV/kPa typical
Pressure Port — Dual axial tube ports (Differential), 0.19 inch (4.93 mm)
Output Response Time — [DATA_NEEDED: Response Time]
Reflow Compatible — No (through-hole module)
Media Compatibility — Non-corrosive dry gases (filtered dry air recommended)

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon