MPXC2012DT1 vs MPX2010DP Vergleich
Detaillierter Direktvergleich von MPXC2012DT1 von NXP Semiconductors und MPX2010DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | MPXC2012DT1 | MPX2010DP |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | NRND | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $7,40 | $8,50 |
| Pressure Type | Differential | — |
| Operating Pressure | 1.45 PSI (10 kPa) | — |
| Maximum Over Pressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Ausgangstyp | Wheatstone Bridge (analog mV) | Analog voltage, Wheatstone bridge (mV level) |
| Full-Scale Output | 24 mV to 26 mV (typ. 25 mV) at 10 V excitation | — |
| Offset (Null) | 0 mV nominal at 10 V excitation | — |
| Excitation Voltage | 10 V DC typical | — |
| Bridge Resistance | [DATA_NEEDED: input/output bridge resistance] | — |
| Linearity | [DATA_NEEDED: linearity %FS] | ±0.05% (typ) |
| Pressure Port Size | Female, 0.128 in (3.25 mm) side port | — |
| Port Style | Side port, single barbed inlet | — |
| Gehäuse / Bauform | 4-SSIP Module (chip-pak, no gel) | — |
| Termination Style | Through-hole PCB (vertical mount) | — |
| Gel Protection | No (bare die in chip-pak cavity) | — |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| Storage Temperature | [DATA_NEEDED: storage temperature range] | — |
| Montageart | Through-hole, vertical | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | Compliant |
| MSL-Level | Not applicable (through-hole sensor module) | — |
| Manufacturer | NXP Semiconductors (formerly Freescale / Motorola) | — |
| Sensortyp | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Technology | — | Piezoresistive (silicon strain gauge bridge) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Versorgungsspannung | — | 10 V DC typical (max 16 V) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |