MPXV2010DP vs MPX2010DP Vergleich
Detaillierter Direktvergleich von MPXV2010DP von STMicroelectronics und MPX2010DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics
MPXV2010DP ✓ AktivSpezifikationsvergleich
| Parameter | MPXV2010DP | MPX2010DP |
|---|---|---|
| Marke | STMicroelectronics | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $6,05 | $8,50 |
| Product Type | Pressure Sensor (Piezoresistive, Differential) | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | — |
| Pressure Type | Differential | — |
| Ausgangstyp | Analog, Ratiometric | Analog voltage, Wheatstone bridge (mV level) |
| Ausgangsspannungsbereich | 0 mV to 25 mV | — |
| Versorgungsspannung | 10 V nominal | 10 V DC typical (max 16 V) |
| Port Style | Dual Ports, Same Side (3.3 mm Tube Male) | — |
| Gehäuse | 8-BSOP (0.475", 12.06 mm Width), Surface Mount | — |
| Betriebstemperatur | 0 C to 85 C | -40 °C to +125 °C |
| Calibration | On-Chip, Laser-Trimmed | — |
| Temperature Compensation | On-Chip, 0 C to 85 C | 0 °C to +85 °C (on-chip) |
| Output Impedance | [DATA_NEEDED: typical output impedance per side, ohms] | — |
| Hysteresis & Linearity | [DATA_NEEDED: %FSS linearity and %FSS hysteresis] | — |
| Response Time / Bandwidth | [DATA_NEEDED: response time or bandwidth] | — |
| Montageart | Surface Mount | — |
| RoHS-Status | Compliant | Compliant |
| MSL-Level | [DATA_NEEDED: moisture sensitivity level] | — |
| Sensortyp | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Technology | — | Piezoresistive (silicon strain gauge bridge) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Linearity | — | ±0.05% (typ) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |