MPXV2010DP vs MPX2010DP Comparison
Detailed side-by-side comparison of MPXV2010DP by STMicroelectronics and MPX2010DP by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
STMicroelectronics
MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics
MPXV2010DP ✓ Active
Specification Comparison
| Parameter | MPXV2010DP | MPX2010DP |
|---|---|---|
| Brand | STMicroelectronics | NXP Semiconductors |
| Category | Pressure Sensors | Pressure Sensors |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $6.05 | $8.50 |
| Product Type | Pressure Sensor (Piezoresistive, Differential) | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | — |
| Pressure Type | Differential | — |
| Output Type | Analog, Ratiometric | Analog voltage, Wheatstone bridge (mV level) |
| Output Voltage Range | 0 mV to 25 mV | — |
| Supply Voltage | 10 V nominal | 10 V DC typical (max 16 V) |
| Port Style | Dual Ports, Same Side (3.3 mm Tube Male) | — |
| Package | 8-BSOP (0.475", 12.06 mm Width), Surface Mount | — |
| Operating Temperature | 0 C to 85 C | -40 °C to +125 °C |
| Calibration | On-Chip, Laser-Trimmed | — |
| Temperature Compensation | On-Chip, 0 C to 85 C | 0 °C to +85 °C (on-chip) |
| Output Impedance | [DATA_NEEDED: typical output impedance per side, ohms] | — |
| Hysteresis & Linearity | [DATA_NEEDED: %FSS linearity and %FSS hysteresis] | — |
| Response Time / Bandwidth | [DATA_NEEDED: response time or bandwidth] | — |
| Mounting Type | Surface Mount | — |
| RoHS Status | Compliant | Compliant |
| MSL Level | [DATA_NEEDED: moisture sensitivity level] | — |
| Sensor Type | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Technology | — | Piezoresistive (silicon strain gauge bridge) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Linearity | — | ±0.05% (typ) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |