MPXV2010DP vs MPX2010DP Comparación

Comparación detallada lado a lado de MPXV2010DP por STMicroelectronics y MPX2010DP por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ Activo

Comparación de especificaciones

Parámetro MPXV2010DP MPX2010DP
Marca STMicroelectronics NXP Semiconductors
Categoría Pressure Sensors Pressure Sensors
Estado del ciclo de vida Activo Activo
Estado del stock In Stock In Stock
Precio unitario (USD) $6,05 $8,50
Product Type Pressure Sensor (Piezoresistive, Differential) —
Operating Pressure Range 0 kPa to 10 kPa (0 PSI to 1.45 PSI) —
Pressure Type Differential —
Tipo de salida Analog, Ratiometric Analog voltage, Wheatstone bridge (mV level)
Rango de tensión de salida 0 mV to 25 mV —
Tensión de alimentación 10 V nominal 10 V DC typical (max 16 V)
Port Style Dual Ports, Same Side (3.3 mm Tube Male) —
Encapsulado 8-BSOP (0.475", 12.06 mm Width), Surface Mount —
Temperatura de funcionamiento 0 C to 85 C -40 °C to +125 °C
Calibration On-Chip, Laser-Trimmed —
Temperature Compensation On-Chip, 0 C to 85 C 0 °C to +85 °C (on-chip)
Output Impedance [DATA_NEEDED: typical output impedance per side, ohms] —
Hysteresis & Linearity [DATA_NEEDED: %FSS linearity and %FSS hysteresis] —
Response Time / Bandwidth [DATA_NEEDED: response time or bandwidth] —
Tipo de montaje Surface Mount —
Estado RoHS Compliant Compliant
Nivel MSL [DATA_NEEDED: moisture sensitivity level] —
Tipo de sensor — Differential Pressure Sensor
Pressure Range — 0 to 10 kPa (0 to 1.45 PSI)
Technology — Piezoresistive (silicon strain gauge bridge)
Typical Full-Scale Span — 25 mV at 10 V excitation
Zero Pressure Offset — 0 mV nominally (±1.0 mV max)
Linearity — ±0.05% (typ)
Response Time — 1.0 ms (typical)
Maximum Overpressure — 75 kPa
Burst Pressure — 200 kPa
Port Configuration — Dual ports (differential), 0.19 inch / 4.93 mm tubes
Package / Mounting — 4-SIP Module (through-hole with axial tubes)
Media Compatibility — Dry air or non-corrosive gas

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización