NE5534PSR vs NE5534ADR2 Vergleich
Detaillierter Direktvergleich von NE5534PSR von Texas Instruments und NE5534ADR2 von onsemi. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5534PSR - Single 10 MHz Low-Noise Op Amp | Texas Instruments (Tape & Reel)
NE5534PSR ✓ AktivSpezifikationsvergleich
| Parameter | NE5534PSR | NE5534ADR2 |
|---|---|---|
| Marke | Texas Instruments | onsemi |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Operational Amplifier Type | Single low-noise operational amplifier | — |
| Maximum Supply Voltage | 30 V | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Equivalent Input Noise Voltage | 3.5 nV/√Hz | — |
| DC Voltage Gain | 100 dB typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| Slew Rate | 13 V/µs | 13 V/µs typical |
| Peak-to-Peak Output Voltage Swing | 32 V typical at VCC = ±18 V and RL = 600 Ω | 32 V typical at VCC+ +18 V and 600 W |
| Output Drive Capability | High | — |
| Small-Signal Bandwidth | High; exact value not stated in verified snippets | — |
| Power Bandwidth | High; exact value not stated in verified snippets | — |
| Distortion | Low; exact numeric value not stated in verified snippets | — |
| Gehäuse | 8-pin SOIC | 8-SOIC, 0.154 inch width, 3.90 mm width |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Common-Mode Input Voltage Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Voltage Swing | 32 V peak-to-peak typical at VCC = ±18 V and RL = 600 Ω | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Type | — | General Purpose |
| Number of Circuits | — | 1 circuit |
| Topologie | — | Single operational amplifier |
| Input Voltage Noise Density | — | 3.5 nV/√Hz typical |
| Gain-Bandwidth Product | — | 10 MHz typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Packaging | — | Tape and reel |
| Product Description | — | Single high-performance low-noise operational amplifier |
| Manufacturer | — | onsemi |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |