NE5534PSR vs NE5534ADR2 Comparación
Comparación detallada lado a lado de NE5534PSR por Texas Instruments y NE5534ADR2 por onsemi. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
NE5534PSR - Single 10 MHz Low-Noise Op Amp | Texas Instruments (Tape & Reel)
NE5534PSR ✓ ActivoComparación de especificaciones
| Parámetro | NE5534PSR | NE5534ADR2 |
|---|---|---|
| Marca | Texas Instruments | onsemi |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Operational Amplifier Type | Single low-noise operational amplifier | — |
| Maximum Supply Voltage | 30 V | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Equivalent Input Noise Voltage | 3.5 nV/√Hz | — |
| DC Voltage Gain | 100 dB typical | — |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| Slew Rate | 13 V/µs | 13 V/µs typical |
| Peak-to-Peak Output Voltage Swing | 32 V typical at VCC = ±18 V and RL = 600 Ω | 32 V typical at VCC+ +18 V and 600 W |
| Output Drive Capability | High | — |
| Small-Signal Bandwidth | High; exact value not stated in verified snippets | — |
| Power Bandwidth | High; exact value not stated in verified snippets | — |
| Distortion | Low; exact numeric value not stated in verified snippets | — |
| Encapsulado | 8-pin SOIC | 8-SOIC, 0.154 inch width, 3.90 mm width |
| Tipo de montaje | Surface mount | Surface mount |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Corriente de alimentación | [DATA_NEEDED: supply current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Common-Mode Input Voltage Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Voltage Swing | 32 V peak-to-peak typical at VCC = ±18 V and RL = 600 Ω | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Amplifier Type | — | General Purpose |
| Number of Circuits | — | 1 circuit |
| Topología | — | Single operational amplifier |
| Input Voltage Noise Density | — | 3.5 nV/√Hz typical |
| Gain-Bandwidth Product | — | 10 MHz typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Packaging | — | Tape and reel |
| Product Description | — | Single high-performance low-noise operational amplifier |
| Manufacturer | — | onsemi |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |