NE5534PSR vs NE5534ADR2 तुलना

विस्तृत दोनों ओर की तुलना NE5534PSR द्वारा Texas Instruments और NE5534ADR2 द्वारा onsemi. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
NE5534PSR NE5534PSR - Single 10 MHz Low-Noise Op Amp | Texas Instruments (Tape & Reel)

NE5534PSR - Single 10 MHz Low-Noise Op Amp | Texas Instruments (Tape & Reel)

NE5534PSR ✓ सक्रिय
onsemi
NE5534ADR2 NE5534ADR2 - Low-Noise 10 MHz Op Amp | onsemi | Audio

NE5534ADR2 - Low-Noise 10 MHz Op Amp | onsemi | Audio

NE5534ADR2 ✓ सक्रिय

विशेषता तुलना

पैरामीटर NE5534PSR NE5534ADR2
ब्रांड Texas Instruments onsemi
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Operational Amplifier Type Single low-noise operational amplifier —
Maximum Supply Voltage 30 V —
Unity-Gain Bandwidth 10 MHz typical 10 MHz typical
Equivalent Input Noise Voltage 3.5 nV/√Hz —
DC Voltage Gain 100 dB typical —
Common-Mode Rejection Ratio 100 dB typical 100 dB typical
Slew Rate 13 V/µs 13 V/µs typical
Peak-to-Peak Output Voltage Swing 32 V typical at VCC = ±18 V and RL = 600 Ω 32 V typical at VCC+ +18 V and 600 W
Output Drive Capability High —
Small-Signal Bandwidth High; exact value not stated in verified snippets —
Power Bandwidth High; exact value not stated in verified snippets —
Distortion Low; exact numeric value not stated in verified snippets —
पैकेज 8-pin SOIC 8-SOIC, 0.154 inch width, 3.90 mm width
माउंटिंग प्रकार Surface mount Surface mount
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
सप्लाई करंट [DATA_NEEDED: supply current] —
Input Bias Current [DATA_NEEDED: input bias current] [DATA_NEEDED: input bias current]
Input Offset Voltage [DATA_NEEDED: input offset voltage] —
Common-Mode Input Voltage Range [DATA_NEEDED: common-mode input voltage range] —
Output Voltage Swing 32 V peak-to-peak typical at VCC = ±18 V and RL = 600 Ω —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Amplifier Type — General Purpose
Number of Circuits — 1 circuit
टोपोलॉजी — Single operational amplifier
Input Voltage Noise Density — 3.5 nV/√Hz typical
Gain-Bandwidth Product — 10 MHz typical
High DC Voltage Gain — 100 V/mV typical
Packaging — Tape and reel
Product Description — Single high-performance low-noise operational amplifier
Manufacturer — onsemi
Supply Voltage Range — [DATA_NEEDED: supply voltage range]
Offset Voltage — [DATA_NEEDED: input offset voltage]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध