NE5534PSRE4 vs NE5534DR Vergleich
Detaillierter Direktvergleich von NE5534PSRE4 von Texas Instruments und NE5534DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ AktivSpezifikationsvergleich
| Parameter | NE5534PSRE4 | NE5534DR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Single general-purpose operational amplifier | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Input Voltage-Noise Density | 3.5 nV/√Hz typical | — |
| Input Offset Voltage | 500 µV typical | — |
| Slew Rate | 13 V/µs typical | 13 V/us typical |
| Maximum Supply Voltage | 30 V | — |
| Supply-Voltage Range | 10 V to 30 V | — |
| Dual-Supply Operating Range | ±5 V to ±15 V | — |
| DC Open-Loop Voltage Gain | 100 dB typical | — |
| Common-Mode Rejection Ratio | 70 dB | 100 dB typical |
| Supply Current per Channel | 38 mA | — |
| Output Voltage Swing | 32 V typical peak-to-peak under stated conditions | — |
| Gehäuse | 8-pin SOIC, 5.30 mm width | 8-SOIC |
| Montageart | Surface mount | Surface Mount |
| Temperature Grade | Commercial | — |
| Lead-Finish Style | Gull wing | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Product Type | — | Single low-noise operational amplifier |
| Manufacturer | — | Texas Instruments |
| Number of Circuits | — | 1 |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |