NE5534PSRE4 vs NE5534DR Comparaison
Comparaison détaillée côte à côte de NE5534PSRE4 par Texas Instruments et NE5534DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ ActifComparaison des spécifications
| Paramètre | NE5534PSRE4 | NE5534DR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Single general-purpose operational amplifier | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Input Voltage-Noise Density | 3.5 nV/√Hz typical | — |
| Input Offset Voltage | 500 µV typical | — |
| Slew Rate | 13 V/µs typical | 13 V/us typical |
| Maximum Supply Voltage | 30 V | — |
| Supply-Voltage Range | 10 V to 30 V | — |
| Dual-Supply Operating Range | ±5 V to ±15 V | — |
| DC Open-Loop Voltage Gain | 100 dB typical | — |
| Common-Mode Rejection Ratio | 70 dB | 100 dB typical |
| Supply Current per Channel | 38 mA | — |
| Output Voltage Swing | 32 V typical peak-to-peak under stated conditions | — |
| Boîtier | 8-pin SOIC, 5.30 mm width | 8-SOIC |
| Type de montage | Surface mount | Surface Mount |
| Temperature Grade | Commercial | — |
| Lead-Finish Style | Gull wing | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Product Type | — | Single low-noise operational amplifier |
| Manufacturer | — | Texas Instruments |
| Number of Circuits | — | 1 |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |