NE5534PSRE4 vs NE5534DR 比較
詳細な並列比較: NE5534PSRE4 メーカー: Texas Instruments および NE5534DR メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
NE5534DR - 30V, 10MHz Low-Noise Audio Op Amp | Texas Instruments (Tape & Reel)
NE5534DR ✓ 生産中仕様比較
| パラメータ | NE5534PSRE4 | NE5534DR |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Amplifier Type | Single general-purpose operational amplifier | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Input Voltage-Noise Density | 3.5 nV/√Hz typical | — |
| Input Offset Voltage | 500 µV typical | — |
| Slew Rate | 13 V/µs typical | 13 V/us typical |
| Maximum Supply Voltage | 30 V | — |
| Supply-Voltage Range | 10 V to 30 V | — |
| Dual-Supply Operating Range | ±5 V to ±15 V | — |
| DC Open-Loop Voltage Gain | 100 dB typical | — |
| Common-Mode Rejection Ratio | 70 dB | 100 dB typical |
| Supply Current per Channel | 38 mA | — |
| Output Voltage Swing | 32 V typical peak-to-peak under stated conditions | — |
| パッケージ | 8-pin SOIC, 5.30 mm width | 8-SOIC |
| 実装タイプ | Surface mount | Surface Mount |
| Temperature Grade | Commercial | — |
| Lead-Finish Style | Gull wing | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Product Type | — | Single low-noise operational amplifier |
| Manufacturer | — | Texas Instruments |
| Number of Circuits | — | 1 |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical at ±18 V |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |