OPA2107AP vs NE5532P Vergleich
Detaillierter Direktvergleich von OPA2107AP von Texas Instruments und NE5532P von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | OPA2107AP | NE5532P |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Precision Dual Difet Operational Amplifier | — |
| Number of Channels | 2 | — |
| Gain Bandwidth Product | 4.5 MHz | — |
| Slew Rate | 18 V/us | 9 V/µs typical |
| Supply Voltage Range | +/-10 V to +/-18 V (20 V to 36 V total) | ±5 V to ±15 V |
| Input Offset Voltage | 1 mV max | 4000 µV maximum |
| Offset Voltage Drift | 10 uV/C max | — |
| Input Bias Current | 10 pA max | — |
| Input Voltage Noise | [DATA_NEEDED: input voltage noise density at 10 kHz] | — |
| Settling Time | Fast settling to 0.01% | — |
| Unity-Gain Stable | Yes | — |
| Output per Amplifier | Standard (General Purpose) | — |
| Gehäuse | 8-PDIP (DIP-8) | 8-pin PDIP (P) |
| Montageart | Through Hole | Through hole |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range for AP grade] | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Amplifier Count | — | 2 amplifiers |
| Product Type | — | Dual low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical with VCC = ±18 V and RL = 600 ohm |
| Process Technology | — | Bipolar |
| Betriebstemperatur | — | 0 °C to 70 °C |
| Primary Application | — | Audio |
| REACH Status | — | [DATA_NEEDED: REACH status] |