OPA2107AP vs NE5532P Comparación
Comparación detallada lado a lado de OPA2107AP por Texas Instruments y NE5532P por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | OPA2107AP | NE5532P |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Precision Dual Difet Operational Amplifier | — |
| Number of Channels | 2 | — |
| Gain Bandwidth Product | 4.5 MHz | — |
| Slew Rate | 18 V/us | 9 V/µs typical |
| Supply Voltage Range | +/-10 V to +/-18 V (20 V to 36 V total) | ±5 V to ±15 V |
| Input Offset Voltage | 1 mV max | 4000 µV maximum |
| Offset Voltage Drift | 10 uV/C max | — |
| Input Bias Current | 10 pA max | — |
| Input Voltage Noise | [DATA_NEEDED: input voltage noise density at 10 kHz] | — |
| Settling Time | Fast settling to 0.01% | — |
| Unity-Gain Stable | Yes | — |
| Output per Amplifier | Standard (General Purpose) | — |
| Encapsulado | 8-PDIP (DIP-8) | 8-pin PDIP (P) |
| Tipo de montaje | Through Hole | Through hole |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range for AP grade] | — |
| Estado RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Amplifier Count | — | 2 amplifiers |
| Product Type | — | Dual low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical with VCC = ±18 V and RL = 600 ohm |
| Process Technology | — | Bipolar |
| Temperatura de funcionamiento | — | 0 °C to 70 °C |
| Primary Application | — | Audio |
| REACH Status | — | [DATA_NEEDED: REACH status] |