OPA2107AP vs NE5532P Comparaison
Comparaison détaillée côte à côte de OPA2107AP par Texas Instruments et NE5532P par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | OPA2107AP | NE5532P |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | Precision Dual Difet Operational Amplifier | — |
| Number of Channels | 2 | — |
| Gain Bandwidth Product | 4.5 MHz | — |
| Slew Rate | 18 V/us | 9 V/µs typical |
| Supply Voltage Range | +/-10 V to +/-18 V (20 V to 36 V total) | ±5 V to ±15 V |
| Input Offset Voltage | 1 mV max | 4000 µV maximum |
| Offset Voltage Drift | 10 uV/C max | — |
| Input Bias Current | 10 pA max | — |
| Input Voltage Noise | [DATA_NEEDED: input voltage noise density at 10 kHz] | — |
| Settling Time | Fast settling to 0.01% | — |
| Unity-Gain Stable | Yes | — |
| Output per Amplifier | Standard (General Purpose) | — |
| Boîtier | 8-PDIP (DIP-8) | 8-pin PDIP (P) |
| Type de montage | Through Hole | Through hole |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range for AP grade] | — |
| Statut RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| Amplifier Count | — | 2 amplifiers |
| Product Type | — | Dual low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Unity-Gain Bandwidth | — | 10 MHz typical |
| Equivalent Input Noise Voltage | — | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | — | 100 dB typical |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical with VCC = ±18 V and RL = 600 ohm |
| Process Technology | — | Bipolar |
| Température de fonctionnement | — | 0 °C to 70 °C |
| Primary Application | — | Audio |
| REACH Status | — | [DATA_NEEDED: REACH status] |