PCA9555DB vs PCA9535DB Vergleich
Detaillierter Direktvergleich von PCA9555DB von NXP Semiconductors und PCA9535DB von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | PCA9555DB | PCA9535DB |
|---|---|---|
| Marke | NXP Semiconductors | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Device Type | 16-bit I2C/SMBus GPIO expander with interrupt | Remote 16-bit I2C/SMBus low-power I/O expander |
| GPIO Count | 16 bits | — |
| Operating Voltage Range | 2.3 V to 5.5 V | — |
| I2C Maximum Frequency | 400 kHz | — |
| I2C/SMBus Interface | Two-wire serial interface | — |
| I/O Port Configuration | Input or output per bit | — |
| I/O Port Tolerance | 5 V tolerant | — |
| Interrupt Output | Active-low, open-drain | Yes |
| Standby Current | 1 uA maximum | — |
| Package Type | SSOP-24 | — |
| Package Pitch | 1.0 mm | — |
| Montageart | Surface mount | — |
| Device Pin Count | 24 pins | — |
| Serial Addressing | Seven-bit I2C address; [DATA_NEEDED: address table] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| RoHS-Status | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Number of I/O | — | 16 |
| Supply Voltage Range | — | 2.3 V to 5.5 V |
| I2C/SMBus Clock Frequency | — | 400 kHz |
| Schnittstelle | — | I2C/SMBus |
| Configuration Registers | — | Yes |
| I/O Direction Control | — | Programmable input/output |
| Standby Current Consumption | — | 1 uA maximum |
| Gehäuse | — | 24-SSOP (0.209, 5.30 mm width) |
| Packaging | — | Tube |
| Betriebstemperatur | — | [DATA_NEEDED: operating temperature range] |
| I/O Voltage Levels | — | [DATA_NEEDED: I/O voltage levels] |
| I/O Output Current | — | [DATA_NEEDED: output current] |
| Input Hysteresis | — | [DATA_NEEDED: input hysteresis] |
| Power-On Reset | — | [DATA_NEEDED: power-on reset behavior] |
| I2C Address | — | [DATA_NEEDED: programmable I2C address range] |