PCA9555DB vs PCA9535DB Comparação
Comparação detalhada lado a lado de PCA9555DB por NXP Semiconductors e PCA9535DB por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | PCA9555DB | PCA9535DB |
|---|---|---|
| Marca | NXP Semiconductors | Texas Instruments |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Device Type | 16-bit I2C/SMBus GPIO expander with interrupt | Remote 16-bit I2C/SMBus low-power I/O expander |
| GPIO Count | 16 bits | — |
| Operating Voltage Range | 2.3 V to 5.5 V | — |
| I2C Maximum Frequency | 400 kHz | — |
| I2C/SMBus Interface | Two-wire serial interface | — |
| I/O Port Configuration | Input or output per bit | — |
| I/O Port Tolerance | 5 V tolerant | — |
| Interrupt Output | Active-low, open-drain | Yes |
| Standby Current | 1 uA maximum | — |
| Package Type | SSOP-24 | — |
| Package Pitch | 1.0 mm | — |
| Tipo de montagem | Surface mount | — |
| Device Pin Count | 24 pins | — |
| Serial Addressing | Seven-bit I2C address; [DATA_NEEDED: address table] | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Number of I/O | — | 16 |
| Supply Voltage Range | — | 2.3 V to 5.5 V |
| I2C/SMBus Clock Frequency | — | 400 kHz |
| Interface | — | I2C/SMBus |
| Configuration Registers | — | Yes |
| I/O Direction Control | — | Programmable input/output |
| Standby Current Consumption | — | 1 uA maximum |
| Encapsulamento | — | 24-SSOP (0.209, 5.30 mm width) |
| Packaging | — | Tube |
| Temperatura de operação | — | [DATA_NEEDED: operating temperature range] |
| I/O Voltage Levels | — | [DATA_NEEDED: I/O voltage levels] |
| I/O Output Current | — | [DATA_NEEDED: output current] |
| Input Hysteresis | — | [DATA_NEEDED: input hysteresis] |
| Power-On Reset | — | [DATA_NEEDED: power-on reset behavior] |
| I2C Address | — | [DATA_NEEDED: programmable I2C address range] |