PCA9555DB vs PCA9535DB مقایسه
مقایسه دقیق کنار به کنار PCA9555DB توسط NXP Semiconductors و PCA9535DB توسط Texas Instruments. مشخصات کلیدی، پارامترهای الکتریکی، بسته‌بندی، وضعیت چرخه عمر، قیمت‌گذاری و موجودی را مقایسه کنید تا بهترین قطعه را برای نیازهای طراحی خود تعیین کنید.
مقایسه مشخصات
| پارامتر | PCA9555DB | PCA9535DB |
|---|---|---|
| برند | NXP Semiconductors | Texas Instruments |
| دسته‌بندی | Interface ICs | Interface ICs |
| وضعیت چرخه عمر | فعال | فعال |
| Device Type | 16-bit I2C/SMBus GPIO expander with interrupt | Remote 16-bit I2C/SMBus low-power I/O expander |
| GPIO Count | 16 bits | — |
| Operating Voltage Range | 2.3 V to 5.5 V | — |
| I2C Maximum Frequency | 400 kHz | — |
| I2C/SMBus Interface | Two-wire serial interface | — |
| I/O Port Configuration | Input or output per bit | — |
| I/O Port Tolerance | 5 V tolerant | — |
| Interrupt Output | Active-low, open-drain | Yes |
| Standby Current | 1 uA maximum | — |
| Package Type | SSOP-24 | — |
| Package Pitch | 1.0 mm | — |
| نوع نصب | Surface mount | — |
| Device Pin Count | 24 pins | — |
| Serial Addressing | Seven-bit I2C address; [DATA_NEEDED: address table] | — |
| محدوده دمای کاری | [DATA_NEEDED: operating temperature range] | — |
| وضعیت RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: automotive qualification status] | — |
| Number of I/O | — | 16 |
| Supply Voltage Range | — | 2.3 V to 5.5 V |
| I2C/SMBus Clock Frequency | — | 400 kHz |
| رابط | — | I2C/SMBus |
| Configuration Registers | — | Yes |
| I/O Direction Control | — | Programmable input/output |
| Standby Current Consumption | — | 1 uA maximum |
| بسته‌بندی | — | 24-SSOP (0.209, 5.30 mm width) |
| Packaging | — | Tube |
| دمای کاری | — | [DATA_NEEDED: operating temperature range] |
| I/O Voltage Levels | — | [DATA_NEEDED: I/O voltage levels] |
| I/O Output Current | — | [DATA_NEEDED: output current] |
| Input Hysteresis | — | [DATA_NEEDED: input hysteresis] |
| Power-On Reset | — | [DATA_NEEDED: power-on reset behavior] |
| I2C Address | — | [DATA_NEEDED: programmable I2C address range] |