PCA9564D vs PCA9555DB Vergleich
Detaillierter Direktvergleich von PCA9564D von NXP Semiconductors und PCA9555DB von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors
PCA9564D ✓ AktivSpezifikationsvergleich
| Parameter | PCA9564D | PCA9555DB |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Controller Type | Parallel bus to I2C bus controller | — |
| Parallel Interface | 8-bit parallel bus | — |
| Serial Interface | I2C bus | — |
| Supply Voltage Range | 2.3 V to 3.6 V | — |
| Nominal Supply Voltage | 2.5 V or 3.3 V | — |
| Versorgungsstrom | 6 mA | — |
| Maximum I2C Bus Frequency | 400 kHz | — |
| Gehäuse | 20-pin SO, 7.50 mm width | — |
| Package Type | SOIC-20 | SSOP-24 |
| Montageart | Surface mount | Surface mount |
| Anzahl der Pins | 20 | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| I2C Address Configuration | [DATA_NEEDED: programmable I2C address range and configuration method] | — |
| Parallel Data Width | 8 bits | — |
| I2C Addressing | [DATA_NEEDED: supported addressing modes] | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | unknown |
| REACH Status | [DATA_NEEDED: REACH compliance status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: automotive qualification status] |
| Device Type | — | 16-bit I2C/SMBus GPIO expander with interrupt |
| GPIO Count | — | 16 bits |
| Operating Voltage Range | — | 2.3 V to 5.5 V |
| I2C Maximum Frequency | — | 400 kHz |
| I2C/SMBus Interface | — | Two-wire serial interface |
| I/O Port Configuration | — | Input or output per bit |
| I/O Port Tolerance | — | 5 V tolerant |
| Interrupt Output | — | Active-low, open-drain |
| Standby Current | — | 1 uA maximum |
| Package Pitch | — | 1.0 mm |
| Device Pin Count | — | 24 pins |
| Serial Addressing | — | Seven-bit I2C address; [DATA_NEEDED: address table] |