PCA9564D vs PCA9555DB 比較

詳細な並列比較: PCA9564D メーカー: NXP Semiconductors および PCA9555DB メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

NXP Semiconductors
PCA9564D PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D ✓ 生産中
NXP Semiconductors
PCA9555DB PCA9555DB - 16-Bit I2C GPIO Expander with Interrupt | NXP

PCA9555DB - 16-Bit I2C GPIO Expander with Interrupt | NXP

PCA9555DB ✓ 生産中

仕様比較

パラメータ PCA9564D PCA9555DB
ブランド NXP Semiconductors NXP Semiconductors
カテゴリ Interface ICs Interface ICs
ライフサイクル状態 有効 有効
Controller Type Parallel bus to I2C bus controller —
Parallel Interface 8-bit parallel bus —
Serial Interface I2C bus —
Supply Voltage Range 2.3 V to 3.6 V —
Nominal Supply Voltage 2.5 V or 3.3 V —
電源電流 6 mA —
Maximum I2C Bus Frequency 400 kHz —
パッケージ 20-pin SO, 7.50 mm width —
Package Type SOIC-20 SSOP-24
実装タイプ Surface mount Surface mount
ピン数 20 —
動作温度範囲 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
I2C Address Configuration [DATA_NEEDED: programmable I2C address range and configuration method] —
Parallel Data Width 8 bits —
I2C Addressing [DATA_NEEDED: supported addressing modes] —
RoHS ステータス [DATA_NEEDED: RoHS compliance status] unknown
REACH Status [DATA_NEEDED: REACH compliance status] unknown
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] [DATA_NEEDED: automotive qualification status]
Device Type — 16-bit I2C/SMBus GPIO expander with interrupt
GPIO Count — 16 bits
Operating Voltage Range — 2.3 V to 5.5 V
I2C Maximum Frequency — 400 kHz
I2C/SMBus Interface — Two-wire serial interface
I/O Port Configuration — Input or output per bit
I/O Port Tolerance — 5 V tolerant
Interrupt Output — Active-low, open-drain
Standby Current — 1 uA maximum
Package Pitch — 1.0 mm
Device Pin Count — 24 pins
Serial Addressing — Seven-bit I2C address; [DATA_NEEDED: address table]

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼