PCA9564D vs PCA9555DB 比較

詳細並排比較 PCA9564D 由 NXP Semiconductors 與 PCA9555DB 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

NXP Semiconductors
PCA9564D PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D - 400 kHz Parallel-to-I2C Controller | NXP Semiconductors

PCA9564D ✓ 啟用中
NXP Semiconductors
PCA9555DB PCA9555DB - 16-Bit I2C GPIO Expander with Interrupt | NXP

PCA9555DB - 16-Bit I2C GPIO Expander with Interrupt | NXP

PCA9555DB ✓ 啟用中

規格比較

參數 PCA9564D PCA9555DB
品牌 NXP Semiconductors NXP Semiconductors
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Controller Type Parallel bus to I2C bus controller —
Parallel Interface 8-bit parallel bus —
Serial Interface I2C bus —
Supply Voltage Range 2.3 V to 3.6 V —
Nominal Supply Voltage 2.5 V or 3.3 V —
供應電流 6 mA —
Maximum I2C Bus Frequency 400 kHz —
封裝 20-pin SO, 7.50 mm width —
Package Type SOIC-20 SSOP-24
安裝類型 Surface mount Surface mount
腳位數 20 —
工作溫度範圍 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
I2C Address Configuration [DATA_NEEDED: programmable I2C address range and configuration method] —
Parallel Data Width 8 bits —
I2C Addressing [DATA_NEEDED: supported addressing modes] —
RoHS 狀態 [DATA_NEEDED: RoHS compliance status] unknown
REACH Status [DATA_NEEDED: REACH compliance status] unknown
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] [DATA_NEEDED: automotive qualification status]
Device Type — 16-bit I2C/SMBus GPIO expander with interrupt
GPIO Count — 16 bits
Operating Voltage Range — 2.3 V to 5.5 V
I2C Maximum Frequency — 400 kHz
I2C/SMBus Interface — Two-wire serial interface
I/O Port Configuration — Input or output per bit
I/O Port Tolerance — 5 V tolerant
Interrupt Output — Active-low, open-drain
Standby Current — 1 uA maximum
Package Pitch — 1.0 mm
Device Pin Count — 24 pins
Serial Addressing — Seven-bit I2C address; [DATA_NEEDED: address table]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價