PCM1798DB vs PCM1794DB Vergleich
Detaillierter Direktvergleich von PCM1798DB von Texas Instruments und PCM1794DB von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | PCM1798DB | PCM1794DB |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Unknown |
| Converter Type | Stereo audio digital-to-analog converter | Stereo audio digital-to-analog converter |
| Architecture | Advanced segment DAC | — |
| Auflösung | 24 bit | — |
| Maximum Sampling Frequency | 200 kHz | — |
| Nominal Audio Sampling Frequency | 192 kHz | — |
| Dynamic Range | 123 dB | 9 V rms mono; 4.5 V rms stereo; 2 V rms stereo |
| THD+N | 0.0005% | 0.0004% typical |
| Ausgangstyp | Differential current output | — |
| Differential Output Current | 4 mAp-p | — |
| Digital Filter Oversampling | 8 times | — |
| Digital Filter Stop-Band Attenuation | -98 dB | — |
| Digital Filter Pass-Band Ripple | ±0.0002 dB | — |
| Supported Sampling Frequency Range | 10 kHz to 200 kHz | — |
| Supported System Clock Ratios | 128fS, 192fS, 256fS, 384fS, 512fS, or 768fS with autodetect | — |
| Process Technology | CMOS | CMOS |
| Gehäuse | 28-lead SSOP | 28-lead SSOP |
| Montageart | Surface mount | — |
| Pin Compatibility | Compatible with PCM1794 pin assignment | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Data Resolution | — | 24 bit |
| Maximum Sampling Rate | — | 192 kHz |
| DAC Architecture | — | Advanced segment DAC |
| Ausgangskonfiguration | — | Balanced current outputs |
| Digital Audio Interface | — | I2S, PCM, and left-justified |
| Digital Input Tolerance | — | 5 V tolerant |
| Supply Condition for Electrical Characteristics | — | VCC1 = VCC2L = VCC2R = 5 V, VDD = 3.3 V |
| Reference Test Condition | — | TA = 25 degrees C |
| Reference System Clock | — | 256 fS |
| Reference Sampling Rate | — | 44.1 kHz |
| Initialization Requirement | — | 1024 system clock periods after reset |
| Clock Jitter Tolerance | — | Improved tolerance; exact value not stated |